Govee RGBICWW (H605D) Manual

Introduction

he Smart Camera in this kit can automatically detect the colors onscreen and project them on the wall behind via the light bars and strip light. This real-time effect syncs perfectly with your movies, W shows, sports, and gaming worlds, bringing another level of immersive experience to your entertainment. Govee RGBICWW TV Light Kit also supports intelligent voice control for hands-free access to your entertainment lighting.

What You Get

Light Bars 2
Light Strip 1
Control Box 1
Camera 1
Power Adapter 1
Light Bar Mounting Stands 2
Foam Stickers 8
Light Strip Clips 10
User Manual 1

At a Glance

Installing Your Device

Installation Steps

1. Wipe the surface the strip light will be installed on to ensure it is dry and clean.
   
2. Stick the strip light to the back of the TV. Press firmly for a few seconds to ensure a secure attachment. Reinforce using the provided clips.
   
3. Place the light bars on either side of the TV screen using the provided mounting stands. In order to achieve the best lighting effect, the two bars should be in line with the screen and about 20 inches (50cm) to either side.
4. Position the camera top-center of the screen looking down, or bottom-center of the screen facing up.
   
5. Insert the light bars and strip light cables (Type-C), and camera cable (USB) into the corresponding control box ports.
   
6. Connect the power adapter cable into the control box and then plug in the adapter to a power outlet.
7. Installation should now be complete!
   
   

1. Choose a dry, clean and smooth surface;
   
2. Wipe off the dust with alcohol prep pad provided;
   
3. Warm the tape with a hair dryer when it's below 10°C/50°F;
   
4. Strip off the protective film;
   Notice: Do not peel off the tape under the film.
   
5. Stick the strip light and press over it about 10 ~ 15s;
   
6. For corner setup, bend the strip and reinforce via clips;
   Notice: Avoid bending on LED beads.
   
7. Reinforce via clips and screws provided;
   
8. Installation completed.
   

LET'S CONNECT

Inspire & Be Inspired

• Share your creations on social media.
• Connect with our active Govee Community.
• Discover new ideas for using your products.

@Govee
@govee_official
@govee.official
@GoveeofficiaI
@Govee.smarthome

Pairing Your Device with Govee Home App

What you need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

1. Download Govee Home App from the App Store (iOS)
   
   
   or Google Play (Android).
   
   
   
   Govee Home App
   
2. Use a smartphone connected to your home 2.4Ghz Wi-Fi network (5Ghz is not supported).
3. Open Govee Home App, tap the "+" icon in the top right corner and search for"H605D".
4. Tap the device icon and follow the onscreen instructions to complete pairing.

Calibrating the Camera Using Govee Home App

1. Ensure the camera is positioned at the top-center or bottom-center of the screen.
   
2. Gently place the provided foam stickers to the 7 position points on the screen as shown in the image here.
   
3. Open Govee Home App, go to the Settings page, then tap "Calibration". Begin calibration by following the instructions shown in the App.

Tips:

• Drag the position points in the calibration image to the foam stickers located on the screen.
  
• The image may be warped due to the nature of the fish-eye camera. Make sure the calibration points match up correctly.
  Note that the calibration lines should not overlap or cross.
  

Specifications

Troubleshooting

1. Cannot connect to Wi-Fi.
   • Check if the camera is powered on. A blue light will indicate the camera is on and functioning correctly.
   • Do not skip connecting to Wi-Fi during pairing process.
   • Ensure your Wi-Fi router is 2.4GHz capable (5GHz is not supported).
   • Ensure you entered the correct Wi-Fi password during the Wi-Fi connection process.
   • Use another smartphone to pair with the device to check if your Wi-Fi network is working.
   • Shorten the distance between the device and the Wi-Fi router to less than 50ft, then try reconnecting.
2. In video mode, the light color is not consistent with the color onscreen.
   • Ensure there are no strong external light sources interfering with the camera.
   • Ensure the camera is installed at the top-center or bottom-center of the screen.
   • Calibrate the camera again by following the instructions previously provided.
3. Calibration has failed.
   • Check the stability of the Wi-Fi connection. A stable connection is required for successful calibration.
   • Follow the app instructions to calibrate.
4. Cannot pair or connect with Alexa or Google Assistant.
   • Ensure the stability of the Wi-Fi connection.
   • Go to the app Settings page and follow the instructions under "User Guide" to pair the device again.
5. The synchronization effect for Music mode is not working properly.
   • Ensure the control box is close to the music source, which will help the mic pick up sounds better.
   • Also try switching the mic source to the smartphone.
6. The adhesive is not sticking properly.
   • Wipe the installation surface fully to ensure it is dry and clean.
   • Do not press with exertion when sticking the foam sticker. To avoid possible damage to the TV screen, make sure to peel it off from the side after use.
7. Only one user can control the device.
   • Each device can only be controlled by one account.
   • If multiple users wish to control the same device, ensure they are using the same account.

For FAQs and more information, please visit www.govee.com

Customer Service

Warranty: 12-Month Limited Warranty

Support: Lifetime Technical Support

Official Website: www.govee.com

NEED HELP?
Contact us anytime!

• Email: support@govee.com
• Report an issue on the app
• Rapid Replacement on the app

Safety Instructions

Read and follow the safety instructions below:

• This product is not waterproof. Avoid exposing its components to splashes, water drops, or every high-humidity environments.
• Be careful of static electricity during installation and usage and keep away from sharp objects and strong corrosive chemicals.
• When bending the strip light during installation, avoid folding the LED strip light component as this may affect its lifespan.
• Remove nails, metal, or other conductive objects on the installation surface before attaching the strip light in order to avoid short circuits.
• The internal light sources of the light bars and strip light cannot be replaced. If the light sources sustain damage, the product should be replaced.
• Do not let children install the light bars or strip light alone.
• External dimmers cannot be used with this product.
• Avoid installing this product near major heat sources.
• Avoid installing the light bars near potentially dangerous sources (e.g., candles, liquid-filled objects.)

Documents / Resources

References

• App Store - Apple
• Google Play
• http://www.govee.com

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Govee RGBICWW (H605D) Manual