TOZO T9 Manual

Touch Control Diagram

The touch area (MFB Touch Panel) is located in the upper part of earbuds handle.

Earbuds Wearing

1. Choose the eartips that fits you most, and place the earbuds into your ears.
   
2. Rotate earbuds back to the auricle side to fit snugly.
   

Reset

If your earbuds accidentally only get one earbud to work, or fail to pair. Please reset it.

1. Delete all TOZO-T9 Bluetooth records on the phone, and turn off Bluetooth. Then hold both earbuds for 5 seconds until white lights flash on to turn off.
2. Tap & hold both earbuds for 5 seconds and release it. The white lights flashes. Then quickly double-tap the earbuds and complete the reset with only one earbud flashing at the end.

Note: If your device displays [Connection failed]. Please delete all [TOZO-T9] pairing history and pair again.

How To Pair

1. Take out the 2 earbuds from the charging case, they will power on and connect to each other automatically within 10 seconds.
2. One of the earbuds flashes white. (Pairing Mode )
3. Search for pairing name [TOZO-T9] and click on it.
   

Left Earbud

Power On: Pick up earbuds from the charging case.
Power Off: Put both earbuds back into the charging case to power off and recharge automatically,

Play/Pause

Previous

Adjusting the volume

Accept

End

Reject

Activating the voice assistant.

The voice assistance will be automatically activated depends on different OS in mobile system

Right Earbud

Power On: Pick up earbuds from the charging case, both earbuds will be on automatically.
Power Off: Put both earbuds back into the charging case to power of and recharge automatically.

Play/Pause

Next

Adjusting the volume

Accept

End

Reject

Activating the voice assistant.

The voice assistance will be automatically activated depends on different OS in mobile system.