Asus ZenWiFi AXE7800 Manual

Hardware Explanations

1. Plug the adapter into the DCIN port, and press the power button.
2. The power LED will light up when your hardware is ready.

Button and Port Explanations

	2.5G / 1G WAN port Connect your optical modem to this port with a network cable.
	LAN ports 1-3 Connect your PC to a LAN port with a network cable.

Specifications:

Before Setup

Preparing to set up an AiMesh WiFi system

1. Find three ZenWiFi AXE7800, and power them on.
2. Use a network cable to connect your optical modem to the WAN port of one ZenWiFi AXE7800, which will be the AiMesh router, and the other two ZenWiFi AXE7800 will be the AiMesh nodes.
3. The LED turns solid blue to indicate that ZenWiFi AXE7800 is ready for setup.

ASUS Router App

Download free ASUS Router APP to set up and manage your router(s).

AiMesh Setup Steps

1. Prepare
   Place your AiMesh router and nodes at least 1 meter apart from each other during the setup process.
2. AiMesh nodes
   Keep your AiMesh nodes powered on and standby for AiMesh system settings.
3. Launching ASUS Router APP
   Launch ASUS Router APP, and then follow the on-screen instructions to finish the AiMesh setup.

NOTE: When you're using a wireless backhaul to connect your router and AiMesh node, the WAN port on your AiMesh node can be used as a LAN port providing up to 2.5G transmission speed.

Troubleshooting

If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again.

1. Move your AiMesh nodes closer to the AiMesh router ideally. Ensure that they are within 3 meters of each other.
2. Your AiMesh nodes are powered on.

Relocation

THE BEST PERFORMANCE
Locate the AiMesh router and nodes at the best place.

NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens. We recommend that you place the routers in an open or spacious location.

ZenWiFi AXE7800 LED indications

	Solid blue: Your ZenWiFi AXE7800 is ready for setup.
	Solid white: Your ZenWiFi AXE7800 is online and works well.
	Solid yellow: The signal between your ZenWiFi AXE7800 router and the node is weak.
	Solid red: Your ZenWiFi AXE7800 router has no Internet connection. / Your node is disconnected from the router.

FREQUENTLY ASKED QUESTIONS

Does the AiMesh router support Access Point mode?

A: Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI (http://www.asusrouter.com), and go to the page Administration > Operation Mode.

Where can I find more information about Mesh WiFi system?
A: Technical support site: https://www.asus.com/support
Service and Support

https://www.asus.com/support ;
Video Tutorials

https://qr.asus.com/wl_videotutorials

Could I setup wired connection between AiMesh routers (Ethernet backhaul)?
A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and nodes to maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available, and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone.

1. Follow the setup steps to establish a connection between the AiMesh router and nodes via WiFi first.
2. Place the nodes in the ideal locations for best coverage. Run an Ethernet cable from the LAN port of the AiMesh router to the WAN port of AiMesh nodes.
   
3. AiMesh system will auto-select the best path for data transmission, whether wired or wireless.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.