Samsung LA32B450 User Manual page 6

3 PC / DVI AUDIO IN
– Connect to the audio output jack on your PC.
– DVI audio outputs for external devices.
4 ANT IN
– To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor
aerial / A cable television network
5 AUDIO OUT [R-AUDIO-L]
– Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theatre.
6 HDMI IN (DVI), , 
– Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD / Blu-ray player)
– No additional Audio connection is needed for an HDMI to HDMI connection.
– The HDMI IN (DVI) jack can be used to connect a PC.
What is HDMI?
N
''High Definition Multimedia interface' allows the transmission of high definition digital video data and multiple channels of
digital audio.
The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed, and supports multi - channel digital audio.
7 AV IN [VIDEO] / [R-AUDIO-L]
– Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
– Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
8 KENSINGTON LOCK (depending on the model)
– The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.
– If you want to use a locking device, contact the dealer where you purchased the TV.
– The location of the Kensington Lock may be different depending on its model.
9 COMPONENT IN , 
– Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (P
– The P , P
R B
– Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
0 SERVICE
– Connector for service only.
[450_Aus]BN68-02041A-03Eng.indb 4
, P , Y) on your set.
R B
and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
, P , Y) on the rear of your set and the other ends
R B
English - 
2009-09-16 11:07:43