To Select The Source; To Edit The Input Source Name - Samsung HL-T5087S Owner's Instructions Manual

To Select the Source

Use to select TV or other external input sources such as DVD players, VCRs, etc. connected to the TV.
1 Press the MENU button.
Press the ◄ or ► button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Source List, then press the ENTER button.
2 Press the ▲ or ▼ button to select a signal source, then press the ENTER button.
➢ You can choose between the following sets of jacks: TV, AV1, AV2, S-Video1,
S-Video2, Component1, Component2, PC, HDMI1, HDMI2, or HDMI3/DVI on the
TV's side panel.
➢
HDMI1, HDMI2, or HDMI3/DVI input can only be selected when the external device is
turned on and connected via HDMI.
➢ You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.

To Edit the Input Source Name

Name the external device connected to the input jacks to make your input source selection easier.
1 Press the MENU button.
Press the ◄ or ► button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, or HDMI3/DVI input jack, then press the ENTER button.
3 Press the ▲ or ▼ button to select VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD
Recorder, PC, Internet TV Recv., Interactive TV Recv., VOD STB, or TV input source,
then press the ENTER button.
Press the EXIT button to exit.
English - 26