Table of Contents
Advertisement
means that you cannot use your cradle again until you
reconfigure the HotSync Manager to communicate with the
port defined for cradle synchronization.
Performing an IR HotSync operation
After you complete the steps to prepare for performing an IR
HotSync operation, it is easy to perform the actual operation.
To perform an IR HotSync operation:
Tap the Applications Launcher icon
1.
Tap the HotSync icon
2.
Tap "Local".
3.
Tap the drop down menu below the HotSync icon and
4.
select "IR to a PC/Handheld".
Position the IR port of your handheld within a couple of
5.
inches of the infrared port of your computer.
Tap the "HotSync" icon to start the IR HotSync operation.
6.
Returning to cradle HotSync operations
If needed, connect the cradle to a serial (COM) port of
1.
your computer.
Click the HotSync Manager icon in the Windows system
2.
tray.
Choose "Setup", and then click "Local".
3.
Select the COM port where your cradle is connected.
4.
Click "OK".
5.
Section 22
262
HotSync® Operations
.
.
Advertisement
Table of Contents
