QFX PBX-61081BT, PBX-61081BT/SI - Rechargeable Portable Speaker Manual

DISPLAY SYSTEM SETTINGS

1. Input Mode: The LED display screen will display the information of input mode for USB/TF/BT/AUX /FM. When a USB flash drive / TF Card is inserted into the USB/TF input, the unit will automatically switch to USB/TF mode and begin playing Mp3 audio files from the USB flash drive / TF Card.
2. Track Number: The track number currently playing from the USB/TFwill display.
3. FM Mode: All FM channels display here. Press "play/pause" button for auto scan all channels.

CHARGING THE SPEAKER

• To protect the lifespan of the built-in battery, be sure to fully charge the PBX-61081BT before use. Not charging your unit right away can affect the performance of the battery. A full recharge takes approxiately 8-12 hours. Plug it in to use it while its charging.

CONTROL PANEL FUNCTIONS

RECORDING: Insert the USB/TF Card and connect the microphone. Turn ON the mic, adjust the mic volume, and press and hold the REC button to BEGIN/END recording.
Press REC to playback the recording.

1. GLOBAL CONTROLS:
   MODE/LED.SW: Press to change between BT/AUX/USB/FM. Pres and hold to disable the partylights.
   REC: Press and hold to start recording to the USB or TF card (Mic only). Press to playback recording.
   REPEAT: Press to repeat one or all tracks.
   PREV: Press to select the previous track or FM station.
   PLAY/PAUSE: Press to Play/Pause the current audio track. In FM mode press to begin auto scan.
   NEXT/TWS: Press for the NEXT track or FM Station. Press and hold to play the recorded files. In bluetooth mode press and hold for TWS sync.
2. AUX INPUT: Connect and external audio device with a 3.5mm TRS audio cable.
3. USB/TF Port: Insert a USB/TF card for (.mp3 format) audio playback. Record microphone to the USB or TF card.
4. MIC. VOL: Adjust the microphone volume level.
5. MIC.ECHO: Adjust the microphone echo level.
6. BASS: Adjust to boost the bass volume.
7. Treble: Adjust to boost the treble volume.
8. VOLUME: Increase or decrease the master volume of the unit.
9. CHARGING INDICATOR: Charging is full.
10. MIC. INPUT: Insert 6.35mm TRS mic cable to use mic.
11. ANT: Extend the telescoping antenna for better radio reception.
12. POWER: Turn the unit ON/OFF. AC 100-240V 50/60hz.

TWS: BLUETOOTH: FM RADIO

TWS CONNECTION

TWS connection: TWS Connection is only for two speakers of the same make and model.

1. Tum ON the units and enable Bluetooth mode on both speakers. They should read BLUE.
2. Press the NEXT/TWS button for 3 seconds on one of the speakers to sync both units together (they must be the same make and model to function).
3. On your mobile device under the Bluetooth menu, search for QFX PBX-61081BT and connect.
4. Open your favorite music app and enjoy True Wireless Stereo.
5. To Exit TWS press and hold the NEXT/TWS button.

BLUETOOTH

• Bluetooth mode: use the MODE button to enable Bluetooth on the PBX-61081BT. Open the Bluetooth settings on your mobile device and search for QFX PBX-61081BT Select the option to pair both devices. Now you can sit back and enjoy the music from your favorite app. You will not need to reconnect Bluetooth when changing modes.

FM RADIO

• Frequency-Modulated stations operate in a frequency band extending from 87.5 MHz to 108 MHz. Use the MODE button to select the FM mode. In FM mode, press the Play/Pause button to scan available frequencies in the area.

CHARGE AND PLAY

When the battery power is completely empty, the unit to cannot charge and perform at 100% of the volume when immediately connected to a power source. It is suggested to charge the unit for a while before using it at 100% volume. The unit will perform and charge at low volume levels. The volume output will increase as the unit continues to charge.

REMOTE CONTROL

1. MUTE: Press button to mute the unit.
2. Press this button to toggle between functions:
   AUX/USB/SD/FM/Bluetooth). Press and hold this button to turn ON/OFF the voice prompt.
3. Press this button to start recording.
4. Press this button to increase the master volume for the unit.
5. Press this button to pause or play the current USB/TF audio track. In FM mode, press this button to auto scan all local channels.
6. Press this button to select the previous song/channel.
7. Press this button to reduce the master volume for the unit.
8. Press this button to repeat one song or all songs.
9. Press this button to playback the recording.
10. Press this button to select the next song/channel.
11. Press this button to select the EQ mode: Normal, Jazz, Roe, Pop, Classical.
12. 0-9 Key number for selecting the audio tracks in the USB/TF Card.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids, heat sources such as radiators, heat registers or under extreme weather conditions. Clean only with a dry cloth.
Users should exhibit extra safety when the WARNING or CAUTION symbol appears in this instruction manual and follow all precautions as they are stated.

CHECK OUT THESE OTHER QFX MODELS!

Follow Us

We would love to hear about your PBX-61081BT Journey!
Tag us @QFXUSA to share your stories.

QFX USA^®, Inc.
RMA Processing
Customer Support Department
2957 E.46th Street I Vernon, CA 90058
support@qfxusa.com
(800) 864-CLUB(2582) or (323) 864-6900
qfxusa.com
Hours of Operation: Monday - Friday, 9am - 5pm PST