Bellababy BLA8015-02 - Breast Pump Manual

Read Before Use

1. Any question during use please contact with Bellababy service team.
   EU customers: service-EU@bellababy-med.com
   NA customers: service-US@bellababy-med.com
2. There are metal springs inside the blue clips, do not microwave or they will melt. They can be boiled or steam sterilized.
3. Do not wash or steam-sterilize the tubing, or the water/moisture inside the tubing will get into the machine and damage the circuit, motor and battery. Make sure the cylinder and cylinder cover are dry enough when turning on the machine.
4. Do not connect with other brands' parts which are not in a closed system (there is a membrane/cylinder to separate air and milk). lf you are not sure please send a email with photos for our confirmation before use.
5. Before the first use, please full recharge the machine. Do not keep using the item when the battery is very low. Frequently doing this will damage the battery life.
6. Accessories are on sale, please click the store name on Amazon products page, then click Product to find them. If still confused please contact the seller.

How to Use

1. Before the first use, please wash every parts except the tubing and machine, then sterilize them by a steam sterilizer (Boiling instead if you do not have a steam sterilizer). lf yours is a UV sterilizer or a microwave oven, please not put in the blue clips because mental spring inside.
2. For moms pumping many times a day, please wash and clean the parts, air dry them after every use. Then sterilize them after the last use.
3. Before pumping, it is better to massage your breasts and warm them with a hot towel for a while, that will help sucking milk smoothly and less pain.
4. Sit down and relax, cover the massage cushion on breast without air leakage. Incline the upper body forward a little. It's better to pump no more than 10 minutes per time.
   If no breast milk come out in 5 minutes, please try other time to pump or consult a doctor.

Matters Need Attention

1. Please do not put the tubing and machine into water to clean and sterilize by a steam sterilizer.
2. After every use, please clean the parts which touched breast or breast milk. Then air-dry them to prevent bacteria growth.
3. When disassemble or assemble again, please follow the instruction to make sure every step is correct, no air leakage.

How to Recharge

The USB cable can connect with phone adapter then plug in wall. Or connect with a power bank, laptop to recharge as long as there is a USB slot

Components of the Product

Assembly Steps

Insert the massage cushion into the shield tightly,

Set the cylinder into the tee joint tightly, then press the cylinder cover closely, no air leakage.

Set the valve on the round bulge in the tee joint tightly (Note: Please do it carefully as the valve is flimsy, if damaged, replace it)

Screw bottle in the tee joint, connect them with machine by the tubing tightly,
If need single pump, just insert the branched tube to the tubing joint as this image show.

Function Description of the Product

1. On/Off Button
2. Massage Mode
3. Continuous Suck Mode
4. Frequency Conversion Mode
5. Normal Suck Mode
6. Power Bank Hole
7. Time Display
8. Battery Status
9. Power Supply Mode
10. Level Display

Function Instruction

	Long press for 3s to turn on the machine, it starts working with default mode for massage and stimulation, after 2 mins, automatically switch to mode, click again to shut off.
	Click , the pump start massaging and stimulating breast. The suction is between 1~6 level, adjustable by clicking
	Click , the pump will suck breast milk continuously to finish milk pumping as soon as possible, The suction is between 1~6 level, adjust the suction by clicking
	Click , the pump will suck breast milk with frequency conversion. lt stimulate breast from different frequencies. The suction is between 1-9 levels, adjustable by clicking
	Click , the pump will suck breast pump normally. The suction is between 1~9 level, adjustable by clicking

Product Parameters

NingBo Huiyoo Baby Products Co., LTD.
Add: 523# Cizhang Road, Zhangqi Industrial Area,
Cixi City, Zhejiang Province, P.R. China.
Tel.: +86 574 63679665
Fax: +86 574 63677885
E-mail: service-US@bellababy-med.com
service-EU@bellababy-med.com

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Bellababy BLA8015-02 - Breast Pump Manual