Connecting Control Cords - Pioneer Elite PRO-1010HD Operating Instructions Manual

Audio connection for component connected to
INPUT5
INPUT5
AUDIO
R L
The audio line for the component connected to INPUT5
can be connected to the AUDIO R/L (INPUT5) pin jacks.
Sound is output from the SPEAKER (L/R) terminals
according to the video input selection.
Audio connection for component connected to
INPUT3 or INPUT4
AUDIO
INPUT 3/4
R L
Audio input to the AUDIO R/L (INPUT3/4) pin jacks is
possible for a component connected to either INPUT3 or
INPUT4.
Sound is output from the SPEAKER (L/R) terminals
according to the video input selection.
Installation and Connections

Connecting Control Cords

Connect control cords between this unit and other
PIONEER equipment having the Î logo. You can then
operate the connected equipment by sending commands
from its remote control unit to the remote control sensor
on this unit.
After the CONTROL IN terminals have been connected,
the remote control sensors on the connected equipment
do not accept commands from the remote control units.
Face the remote control units to the remote control
sensor on this unit when operating the connected
equipment.
Notes
÷ Make sure that the power is turned off when making
connections.
÷ Complete all component connections before making control
cord connections.
OUT
CONTROL
The control cables
(commercially available) are
mono sound cables with
mini plugs (no resistance).
About SR+
The CONTROL OUT terminal on the rear of this unit
supports SR+ that allows linked operations with a
PIONEER AV receiver. SR+ presents functions such as
the input switch linkage operation function and the DSP
surround mode display function. For more information,
see the user's manual for the PIONEER AV receiver
supporting SR+.
Note
If you use SR+, be sure to perform SR+ related function settings
on your PIONEER AV receiver. When doing this, assign the
appropriate setting on the receiver side for INPUT1 to INPUT5 of
this unit (because this unit does not feature a built-in tuner, there
is no TV function).
CONTROL
SR
IN
OUT
CONTROL
IN
SR
OUT
CONTROL
IN
SR
OUT
19
EN