Pioneer PDP-433CMX Technical Manual page 124

Before Beginning Adjustments
3) About Screen Size
1 Screen sizes for video signal input # (applies only when equipped with PDA-5002)
Appearance of picture
WIDE
4 : 3
FULL
ZOOM
2 Screen sizes for PC signal input
• DOT BY DOT
Faithful 1:1 reproduction of the dots and lines of the
input signal on the screen.
640 dots
1280 dots*
1024 dots*
(This diagram is for 640 x 480 input)
1
* : PDP-503CMX/PDP-503MXE
2
* : PDP-433CMX/PDP-433MXE
• 4:3
Reproduction that fills the screen without changing the
aspect ratio of the input signal.
124
Suitable for watching news and sports etc. With movies and sports
etc., gives a spacious impression with plenty of punch.
Suitable for watching news and dramas etc. Can watch programs with
the original image soft (software) picture border. (In order to prevent
the screen from burning out, the picture border will be displayed in a
slightly different position every time you turn the display on.)
Suitable for high vision pictures and wide-screen pictures ("squeeze")
Of the movie theater size pictures, predominantly suitable for
CinemaScope size pictures. Gives a really spacious impression with
even more punch.
Of the movie theater size pictures, predominantly suitable for Vista
size pictures. Gives a really spacious impression with even more punch.
1
2
• FULL
16:9 reproduction of the input signal that really fills the
screen.
• PARTIAL (Compatible only with PDP-503CMX/PDP-
503MXE)
PARTIAL is possible with 1280 x 1024 / 60Hz input
signals only. Faithful 1:1 reproduction of the dots and
lines of the input signal on the screen. Note however
that only part of the picture is displayed (part is lost off
the edges of the screen).
Use the 5/∞ buttons to adjust the image position
(V-scroll function).