Dangbei Emotn N1 - Smart Projector Manual

Projection Size Description

*The best recommended projection size is 100 inches.

Packing List

Before using this product, please check that all items are in the box.

Your Product

Overview and interface description.

Remote Control

Open the battery compartment cover of the remote control.
Install 2 AAA batteries.*
Put back the cover.

*Please insert new batteries according to the polarity indication.

Remote Control Pairing

• Place the remote control within 10cm of the projector.
• For first-time use, follow the on-screen projector instructions: Press and hold [Volume Down] and [Right] simultaneously until an indicator light begins flashing.
• This means that the remote control enters the pairing mode.
• When the indicator light stops flashing, means connection is successful.

*If pairing is unsuccessful, repeat the above steps after the remote control indicator Iight stops flashing.

Network

• Enter [Settings] — [Network]
• Select the wired network or Wi-Fi.

Focus

• Enter [Settings] [Focus]
• Select [Auto], the screen will automatically clear.
• Select [Manual], press the remote control up/down button of the navigation key to adjust the focus according to the display screen. When the screen is clear, stop the operation.
  

Keystone Correction

• Enter [Settings] - [Keystone]
• Select [Auto], the screen will be automatically corrected
• Select [Manual], to adjust the four points and the size of the frame
  

Inputs

• Enter [Inputs] - HDMI/HOME/USB.
• Watch the content from the different signal sources.

Bluetooth Speaker Mode

• Open the device's Bluetooth Speaker application.
• Turn on the Bluetooth of the mobile phone or tablet, select the device of [Emotn_PRJ], and connect.
  
• The device can play music content from mobile phones or tablets.
  

Screen Mirroring

• You can wirelessly cast the screen of your smartphone or tablet onto the projection surface.
• Please open the screencast APP to learn more about the operation method.

Troubleshooting

1. No audio output

   1. Be Sure not to press the remote control "Mute" button.
   2. Be sure the projector interface "LINE OUT", "HDMI ARC" or Bluetooth does not connect to the external audio device.

2. No image output

   1. Press the power button on the top cover. If powered on, the button indicator light will turn off.
   2. Be sure the power adaptor has power output.

3. No network

   1. Enter settings, and check the network connection status in the network option.
   2. Be sure the network cable inserts the projector interface "LAN" normally.
   3. Be sure the router is configured correctly.

4. Blurry Image

   1. Adjust the focus ring or keystone.
   2. Projector and screen/wall must be at the effective distance.
   3. Projector lens is not clean.

5. Non-rectangular Image

   1. Place the projector perpendicular to the screen/wall, if the keystone correction function is not used.
   2. Use the keystone correction function to adjust the display.

6. Automatic keystone correction failed

   1. Be Sure the TOF on the front panel not be blocked or dirty
   2. The best automatic keystone correction distance is 1.5-2.5m, horizontal ±20°.

7. Autofocus failed

   1. Be sure the TOF on the front panel not be blocked or dirty.
   2. The best autofocus distance is 1.3-2.5m, horizontal ±20°.

8. Remote Control is unresponsive

   1. Be sure the remote control is paired successfully via Bluetooth communication.
   2. If the pairing is successful, the indicator light does not flash when the button is pressed. If the pairing is unsuccessful, the Remote Control at IR communication, the indicator light does flash when the button is pressed.
   3. Be sure there are no interferences or obstructions between the projector and remote control.
   4. Check the battery charge and installation polarity.

9. Connect the Bluetooth devices

Enter settings, open the Bluetooth option to check the Bluetooth device list, and connect the device

10. Others

Please feel free to contact us.
support@emotn.com

Important Precautions

Do not look directly at the projection beam with your eyes, because the strong beam may harm your eyes.
Do not block or cover the heat dissipation holes of the device to avoid affecting the heat dissipation of internal parts and damaging the device.
Keep away from humidity, exposure, high temperature, low pressure, and magnetic environment.
Do not place the device in areas susceptible to excessive dust and dirt.
Put the device in the flat and stable station, do not put it in the place prone to vibration.
Do not allow children to handle the device without supervision. No not place heavy or sharp objects on this device.
Avoid extreme vibrations as they may damage the internal components.
Please use correct type of battery for the remote control.
Only use attachments/accessories specified or provided by the manufacturer. (such as the exclusive power adapter, bracket, etc).
Do not disassemble the device personally, repair the device only for staff authorized by the company.
Place and use the device in an environment of 0°C-40°C.
Do not use the earphones for a long time. Excessive sound from the earphones can damage your hearing.
The plug is considered as disconnect device of adapter.
As with any bright source, do not stare into the direct beam.
The adapter shall be installed near the equipment and shall be easily accessible.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from this device.
Unplug this device if there are lightning storms or when unused for a long period of time.
Where the power plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
Never touch the power cable or the power connector with wet hands.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Dangbei Emotn N1 - Smart Projector Manual