Soundcore Space One - Headphone Manual

APP

Download the soundcore app to switch ambient sound modes, adjust EQ settings, update firmware, and explore more.
If your headphones cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

WEARING

Wear the headphones with the "L" logo on your left ear and "R" logo on your right ear. Adjust the length of the headband for a comfortable fit.

CHARGING

Fully dry the USB port before charging.
Do not turn on your headphones while charging.
Use a certified USB-C charging cable and charger to prevent any damage.

POWERING ON & PAIRING

Auto Pairing: Press and hold the power button for 3 seconds to power on. The headphon es will automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore Space One" on your device's Bluetooth list to connect.
Google Fast Pairing: Enjoy instant pairing with your Android smartphone (running Android 6.0 and above) via Fast Pair enabled by Google. To manually enter Bluetooth pairing mode, when the headphones are powered off, press and hold the power button for 5 seconds to pair.

DUAL CONNECTIONS

The headphones can connect with two devices at the same time. When already connected to one device, press the power button twice to pair with another device.

In the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device.

BUTTON CONTROLS

* You can enable Normal mode in the soundcore app.

NOISE CANCELLATION

To reduce ambient noise, switch to noise cancellation (default) via the NC button and customize it in the soundcore app.

• Adaptive Noise Cancelling: Adjust the level of noise cancellation automatically for various scenarios.
• Custom Noise Cancelling: Set the level of noise cancellation manually.

TRANSPARENCY

To stay aware of your surroundings while listening to music, switch to transparency mode via the NC button and customize it in the soundcore app.

• Custom Transparency Mode: Set the level of transparency manually.

EASY CHAT

Easy Chat mode automatically lowers the volume of music and amplifies the voice of the person you're talking to so that you can communicate without taking the headphones off.

• To activate Easy Chat, hold the left panel for 1 second until you hear a notification sound. Turn off this mode by releasing your hand. (Enabled in app)
  
• Easy Chat will automatically turn on when you're talking, and off when you stop talking for 5 seconds. (Beta version is enabled in app)

WEARING DETECTION

Auto-pause music playback when removing the headphones, wear them again to resume.
*You can enable Wearing Detection in the soundcore app.

LDAC

Enable LDAC in the soundcore app for higher-quality audio.
*Only available on devices powered by Android 8.0 or later.

• Use devices powered by Android 8.0 or later to experience LDAC quality sound.
• LDAC provides higher quality sound, increases power consumption, and reduces playtime.
• Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.

1. Go to settings in the soundcore app.
   
2. Click on "Sound Mode".
   
3. Select "Preferred audio quality" to switch to LDAC codec.
   
4. You will be notified that the headphones do not support LDAC when connected to two devices. Select "Turn on" to continue.
   
5. It takes about 10 seconds to switch audio codecs. You may be requested to update the headphones' firmware if available.
   

WIRED LISTENING

Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will automatically turn off Bluetooth mode.

RESET

You might need to reset your headphones if you experience connectivity or function issues.
Delete the pairing history from your Bluetooth device first. Press and hold the volume up and power button simultaneously for 5 seconds until the LED flashes red three times.

LED LIGHT GUIDE

FIRMWARE UPDATE

You will be informed once the new version of firmware is detected when you connect the headphones with the app. Ensure the headphones are powered on and connected to a device until the firmware update is complete. During the update, avoid any usage and ensure stable access to the internet.

SPECS

Specifications are subject to change without notice.

Input	5 V 0,58 A
Rated output power	10mW
Battery capacity	580mAh
Charging time	2 hours
Playtime (with ANC off)	Up to 55 hours
Playtime (with ANC on)	Up to 40 hours
Driver size	40mm
Frequency response	20Hz - 20kHz
Impedance	16Ω
Bluetooth version	5.3
Bluetooth range	15m / 49ft

Documents / Resources

References

• Google Play
• App Store - Apple

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Soundcore Space One - Headphone Manual