Ivation IVADM45 - Dehumidifier Manual

Also See for IVADM45:

User manual (1 page)

Table of Contents

Contents

1 Important Instructions
- 1.1 Intended Use
- 1.2 How Does it Work
2 Box Contents
3 Parts & Controls
4 Operation
5 Technical Specifications
6 Maintenance
7 Safety Instructions
8 Documents / Resources
- 8.1 Download manual

Ivation IVADM45 - Dehumidifier Manual

Important Instructions

Intended Use

This device is intended for use in the removal of excess moisture from small rooms such as studies, walk-in closets and bathrooms. Other than the removable water tank, this device is not user serviceable and should not be disassembled. Any use other than that described above will lead to damage to the product and may present additional risks.

How Does it Work

The Dehumidifier works by way of thermoelectric cooling, which uses what's known as the Peltier effect to create a heat flux between the junction of two different types of materials. Using no compressors or moving parts, the device quietly pulls moisture from the air around it, removing muskiness and dampness from the room.

Box Contents

1 x Dehumidifier
1 x Water Tank
1 x Power Cord
1 x User Manual

Parts & Controls

On/Off Switch
Green "On" LED
Yellow "Full" LED
RH Level Display
RH Up/Down Buttons
Air Inlet Grill
Dry Air Outlet Grill
Carrying "Handle" Opening
Removable Water Tank
Tank Pull-Out "Handle"
Water Displacement Hole w/Plug
Hydraulic Cut-Off
AC/DC Power Adapter
DC Power Socket
Rubberized Stability Feet

Operation

Basics

To remove excess moisture from small rooms, place Dehumidifier in preferred area.
Insert smaller end of AC/DC Power Adapter (#13) into DC Power Socket (#14).
Connect other end to wall socket.
Toggle On/Off Switch (#1) to On position.
To turn unit off at any time, toggle On/Off Switch (#1) to Off position first, then unplug AC/DC Power Adapter (#13).

Setting Relative Humidity Levels

The Dehumidifier features an advanced humidistat function. Dehumidifiers without a humidistat stay on and work hard non-stop even if RH levels drop as low as 20%. This wastes energy and wears out the power adapters. With this Dehumidifier's humidistat function, you can set your desired relative humidity level in the range of 40%-80%. When RH levels increase beyond your set level by a value of 5%, the machine automatically turns on. When RH levels decrease below your set level by a value of 5%, the machine automatically turns off.
Note: You can override the humidistat and restart the machine by pressing and holding the DOWN button for 5 seconds once the machine turns off.
By default, the unit is set to 50% RH.

To set your desired level:

Toggle On/Off Switch (#1) to On position.
Wait a few seconds until RH Level Display (#4) reads current RH level.
Depress the RH Up/Down Buttons (#5) to select your desired RH level.
Display will flash ten times, then revert to showing current environment RH.

Emptying Water Tank

The Dehumidifier will automatically turn off once tank is full.
The Yellow "Full" LED (#3) will turn on.
Before removing water tank, toggle On/Off Switch (#1) to Off position.
Insert two fingers into Tank Pull-Out Handle (#10) and gently pull out.
Pull out plug from Water Displacement Hole (#11).
Pour collected water out from tank into sink or toilet.
Reinsert plug and slide tank back into device until it clicks.
Device is now ready for use again.

Technical Specifications

Capacity: Approximately 25 Ounces/Day at 86°F, 80% RH
Water Tank Capacity: 2 Liters
Cooling Element: Thermoelectric Peltier Module
Fan: 90mm x 90mm High-Speed, Long-Life DC Brushless Motor w/Turbo Blades
Power Adapter: 12v DC 6Amp
Power Consumption: 72w
Water Level Detector: Auto-Off When Full w/Yellow "Full" LED
Working Environment: Over 59°F, Over 40% RH
Dimensions: 13.75" x 8.58" x 7"
Total Cord Length: 127" (10' 7")

Maintenance

Always turn the Dehumidifier off and disconnect power cord before cleaning unit. Use a piece of soft cloth to clean product surface, or use soft-bristled brush to wipe dust off air inlet grills.

Safety Instructions

If damage is incurred as a result of non-compliance with these operating instructions, manufacture's guarantee will be voided. Ivation assumes no liability for personal injury or damage to property caused by incorrect handling or non-observance of the safety instructions.