Download Print this page

Advertisement

Quick Links

EN - INSTRUCTIONS FOR USE
E-FEEL S*
Last update: V1 - 13/06/2024
+
+
<125kg
>1,50m/
+14
4ft 11in
<2m/
<275.5lbs
6ft 6in
* Feel
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the E-FEEL S Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Decathlon E-FEEL S Series

  • Page 1 EN - INSTRUCTIONS FOR USE E-FEEL S* Last update: V1 - 13/06/2024 <125kg >1,50m/ 4ft 11in <2m/ <275.5lbs 6ft 6in * Feel...
  • Page 2 CONTENTS INTRODUCTION ..........................2 SAFETY INFORMATION ........................2 HOW TO GET THE MOST FROM YOUR E-BIKE ................4 YOUR PRODUCT ..........................4 ASSEMBLY ............................5 BEFORE EACH USE ........................10 GENERAL OPERATION ........................10 ELECTRIC OPERATION ........................11 CHARGING ............................14 ERROR CODES ..........................
  • Page 3 In case of contact with skin and/or eyes, rinse thoroughly, remove solid particles and contaminated clothing. Seek medical assistance. If the battery leaks, put on gloves and place the battery in a plastic bag. Return the battery to your Decathlon store immediately.
  • Page 4 HOW TO GET THE MOST FROM YOUR E-BIKE < 1,2 bar > 1,2- 2 bars The bike will operate better and more Under-inflated tyres are more prone to efficiently with tyres inflated between punctures. 1,2 and 2 bar. +/- 20° +/- 5°...
  • Page 5 To ensure the handlebars, stem, seat, seat post and wheels are correctly attached, it’s best to use the appropriate tools and tighten each component to its specific torque value (in Nm). Please follow the bicycle assembly instructions to avoid any safety risks. If you have a problem, contact a Decathlon workshop to have your bike checked. BOX CONTENTS...
  • Page 6 FITTING THE FRONT WHEEL: 10 N.m 1. Remove the axle from the fork. 4. Place the axle in the wheel. 2. Remove the shim located in the brake pads. 5. Screw the axle clockwise and tighten it until you reach the right tightening torque.
  • Page 7 ADJUSTING THE SEAT HEIGHT : 6 N.m 6 N.m 1. Insert the seat post into the seat tube. 2. Adjust the seat height according to your own height: To work this out, sit on the bike with your heel resting on the pedal in the low position. The crank arm should be parallel to the seat post. Your leg should be fully extended without causing any discomfort.
  • Page 8 TIGHTENING TORQUES : Component Tightening torques Stem / Handlebar 6 N.m Stem / Fork 6 N.m Handles / Handlebar 2 N.m Saddle / Seat post 9 N.m Seat post / Frame 6 N.m Seat post lever / Handlebar 2 N.m Seat post cable 2 N.m Brake lever...
  • Page 9 SAG SUSPENSION ADJUSTMENT SAG = 30% Download Rockshox Trailhead app to follow all the instructions about the SAG suspension. Refer to this table for adjusting the shock absorber and knowing about the maximum weight and pressure to put on the fork. SAG = 30% E-FEEL 700 &...
  • Page 10 For your safety, check the front and rear brakes before each use of your bike. They must be in perfect condition. Check all brake mounting components regularly. Disc brakes should be checked regularly. In the event of a brake fluid leak, action is required. Get in touch with a Decathlon workshop.
  • Page 11 ELECTRIC OPERATION CONTROLS General controls Long press: ON/OFF Long press: Light ON/OFF Short press: Increase / Up Short press: Decrease / Down Long press: Activate/deactivate the walk mode Long press: Settings menu/Reset DISPLAY Battery level Automatic / manual gear shifting Bluetooth Assistance gauge Light ON/OFF...
  • Page 12 ASSISTANCE LEVELS : The electrically assisted bike can be used with or without assistance by pressing ON/OFF and switching between OFF-ECO-TRAIL-BOOST modes. The selected mode will be displayed on your display screen. The selectable OFF-ECO- TRAIL-BOOST assistance modes let you choose a power assist level in addition to the effort provided.
  • Page 13 MANUAL AND AUTOMATIC MODES E-FEEL 900 S Manual mode : MODE M : The buttons permit you to select the assistance mode you need. Automatic modes : For A1 or A2, press MODE A1 : AUTOSHIFT + FREESHIFT For sporty riding (pedaling cadence of 60-70 rpm). MODE A2 : AUTOSHIFT + FREESHIFT For dynamic riding (pedaling cadence of 80-90 rpm).
  • Page 14 CHANGING GEARS : E-FEEL 700S E-FEEL 900S E-FEEL 900S TEAM EDITION AUTO AUTO • E-FEEL 700S: A = Manual gear shifting up / B = Manual gear shifting down • E-FEEL 900S: B = Manual gear shifting down / B = Manual gear shifting up / AUTO = Automatically selects the assistance mode depending on the effort you put in.
  • Page 15 CHARGING PROPERTIES OF THE BATTERY AND ITS CHARGER The bike battery is a rechargeable Lithium battery. Battery Charger 36V / 17,5 Ah Input: 100 - 240 V AC / 1.9 - 0.9 A / 50 - 60 Hz Capacity: 630 Wh Output: 42 V DC / 4 - 4.6 A PRECAUTIONS FOR USING THE BATTERY AND CHARGER Battery to be handled with care.
  • Page 16 CHARGING : Lift the cover of the charging socket and plug the charger into the charging socket. When the LED is orange, the bike is charging. When the LED is flashing orange, there is an error. See the ERROR CODES section of this user guide. Charging BATTERY : Repeatedly flashes green 1 time...
  • Page 17 Turn the battery off and switch it back on again without putting your feet on the pedals. E012 Sensor initialization failed. Adjust chain tension. If the problem persists, please take the bike to a Decathlon workshop. Log in to E-tube project and restore firmware. E013 Anomaly detected in the drive unit firmware.
  • Page 18 Restore the firmware. E043 A part of the firmware might be corrupted. If the problem persists, please take the bike to a Decathlon workshop. E044 Error due to system configuration. If the problem persists, please take the bike to a Decathlon workshop.
  • Page 19 W010 decreased. detected in the motor unit. If the problem persists, please take the bike to a Decathlon workshop. Install the magnet and speed sensor in the appropriate locations. The speed sensor has not detected any bicycle speed Refer to GENERAL OPERATION > BRAKES in this instructions or in the SHIMANO STEPS W011 signal.
  • Page 20 The installed shift unit is different from the system W30200 (W032) unit. configuration. If the problem persists, please take the bike to a Decathlon workshop. Turn the crank backwards two or three times. W205 Sensor initialization could not complete normally.
  • Page 21 “Contact Cleaner” product, carefully following the instructions for the product used. For more information on use, maintenance, after-sales services or if you have any questions, visit DECATHLON’s support website (www.support.decathlon.com) or visit a DECATHLON store. BRAKES : •...
  • Page 22 Your bike is designed to last over time (not counting wearing parts, which is normal). If you no longer need your bike, consider reselling it second-hand rather than throwing it away. You can contact your Decathlon store, which can help you with the process to follow.
  • Page 23 https://www.decathlon.com.tr/...

This manual is also suitable for:

E-feel 700 sE-feel 900 sE-feel 900 s team edition