Troubleshooting; Printing Operation Fails - Panasonic WORKIO DP-130 Operating Instructions Manual

Troubleshooting

Troubleshooting

Printing operation fails

If the printing operation fails, check the following points first:
• The connection cable (Parallel Printer Cable or Ethernet LAN Cable) is properly connected.
• The length of the parallel printer cable is not longer than 20 ft. (6 m).
• Power of the device is turned ON.
• Paper is loaded properly on the device.
• Error message is not displayed on the device.
The above points can be verified by printing a test page. Refer to the following for procedures for test page
printing:
Windows 98/Me
Windows NT 4.0
Windows 2000/XP
NOTE
172
[General Tab] (See page 31)
[General Tab] (See page 41)
[General Tab] (See page 55)
1. The status of the devices can be verified by the status monitor (See page 126).