Panasonic Toughbook CF-19KHRAG2M Supplementary Manual page 4

Read Me First
Canadian ICES-003
This Class B digital apparatus complies with Canadian
ICES-003.
<Only for model with wireless LAN/Bluetooth>
Industry Canada
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
E
As an
determined that this product meets the
The international
saving through the use of computers and other of ce equipment. The program backs the development and dis-
semination of products with functions that effectively reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted products are of ce equipment such as computers,
displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.
For information about
Web site: www.energystar.gov
Models for U.S.A. / Canada
4
S
®
NERGY TAR Partner, Matsushita Electric Industrial Co., Ltd. has
Outline of the International
E S
®
NERGY TAR Of ce Equipment Program is an international program that promotes energy
E S
®
NERGY TAR , refer to the following web side:
A lithium ion battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
L'appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion.
Pour des renseignements sur le recyclage de la batterie, veuillez composer le
1-800-8-BATTERY.
High power radars are allocated as primary users
(meaning they have priority) of 5250-5350 MHz and
5650-5850 MHz and these radars could cause interfer-
ence and/or damage to LELAN devices.
7-M-2
This device has been designed to operate with an anten-
na having a maximum gain of 2.15 dB. Antenna having a
higher gain is strictly prohibited per regulations of Industry
Canada. The Required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more
30-Ca-1-1
than that required for successful communication.
E S
®
NERGY TAR guidelines for energy ef ciency.
E S
®
NERGY TAR Of ce Equipment Program
30-Ca-2-1
25-Ca-1-1
22-M-1