Formatting The Card - Panasonic Lumix DMC-LC50 Operating Instructions Manual

Formatting the Card

Preparation
• Set the mode dial to [
1
Select [FORMAT].
2
PLAY
RESIZE
TRIMMING
FORMAT
SELECT
WB
2
Select [YES] to format.
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
YES
SELECT
WB
Playback (advanced)
]. (P29)
/
SETUP
2
SET EXIT
MENU
WB
NO
SET
WB
¬ Suggestions/Tips ¬
• Usually, it is not necessary to format
the card (initializing). Format the card
when the message [MEMORY CARD
ERROR] appears.
• If the card has been formatted by a PC
or other equipment, format the card on
the camera again.
• After formatting, recorded pictures and
any other data cannot be recovered.
• If the card is formatted all images
and data will be permanently
erased. They cannot be reclaimed.
If any important pictures are on the
card, please copy them to your PC
before proceeding.
• During formatting, do not turn the
camera off.
• Use sufficiently charged batteries
(P13) or AC adaptor (optional,
DMW-AC1).
• When the SD Memory Card
Write-Protect switch is slid to [LOCK],
you cannot format the card.
• If the card cannot be formatted,
consult your nearest servicenter.
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
93