Carrier TRANSICOLD Vector 8700 Operation And Service Manual page 102

Technician mode should be canceled when work is complete. If Technician mode is not
canceled, Technician mode will be available for 60 minutes after the last key press without
requiring a code, even after placing the SROS in the OFF and then back in the RUN/STOP
position.
4. Once activity requiring use of Technician mode is complete, Technician mode should be manually canceled.
• To cancel from the TECHNICIANS MENU screen, highlight CANCEL TECHNICIAN MODE/PIN
ACCESS and then press the "=" key. This will return the system to the Advance User mode.
• To cancel from any screen, press and then release the two outside soft keys simultaneously (Note: the
system will not respond) and then press the "=" key. The system will return to Driver mode.
5.2.1 Technician Hour Meters
Hour meters, other than standard hour meters are available for viewing when in Technician mode. Instructions for
viewing these hour meters are provided in
1
1. Enter the Technician mode, as described in
the BACK or EXIT key and then press the MENU key until HOUR METERS is displayed.
2. Press the HOUR METER soft key to display the hour meter screen.
62-12259
Figure 5.2.
Figure 5.2 Technician Hour Meters
START/STOP
Viewing Menu Soft Key
Press Menu Key to Scroll
INTELLISET PRETRIP
HOUR METERS (1 OF 4)
STANDARD HOUR METERS
OTHER METERS AND COUNTERS
MAINTENANCE HOUR METERS
RESET HOUR METERS
END OF LIST
BACK
DIESEL COOL
Selections
HOUR UNIT
METER
DATA
Figure 5.1. While in the TECHNICIANS MENU screen, press
NOTE: This line will only dis-
p l a y i f o n e o r m o r e h o u r
meters has timed out and is
ready to be reset.
EXIT
5–2
2