HPRT Qutie Manual

Product Introduc�on
Appearance and Components
Paper Outlet Side Cover
Cu�er Bu�on
LED Indicator
Power Bu�on
Lanyard Hole
USB Interface
Packing List
Printer Quick Start Guide
Product Introduc�on
LED Indicator Status
ON: Error (Paper jam/Paper end)
Red LED Error Status Quick Flash: TPH is over temperature
Slow Flash: Low power
ON: Charging finished
Green LED Basic Status
Slow Flash: Charging
Bu�on Opera�on
Hold down the power bu�on for a few seconds: Turn on/off the printer
Press the power bu�on: Posi�on and calibrate the loca�on of thermal label paper
and hea�ng line.
Paper Loading
Place your hands on
both sides of the side
cover, push upward per
Load the paper as shown
the direc�on shown in
in the figure and make sure
the figure to open it.
the print side faces up. Close the side cover and
pull some extra paper.
App Download
Scan the QR code to download App.
Connec�on and Prin�ng
01
Turn on the Bluetooth on the phone, open the App,click
"Connect printer",and"Connect"with"Qu�e-XXXX".
02
Click "Scan", and scan the QR code on the paper roll to
get more details about the paper.
03
Edit the label as needed, and then click "Print".
Note: App opera�on shall be subject to the latest version.