Gigabyte Z890 GAMING X WIFI7 User Manual page 23

8) ARGB_V2_1/ARGB_V2_2/ARGB_V2_3 (Addressable RGB Gen2 LED Strip Headers)
The headers can be used to connect a standard 5050 addressable RGB Gen2 LED strip, with maximum
power rating of 3A (5V) and maximum number of 256 LEDs.
ARGB_V2_3 ARGB_V2_1
Connect your addressable RGB Gen2 LED strip to the header. The power
pin (marked with a triangle on the plug) of the LED strip must be connected
to Pin 1 of the addressable LED strip header. Incorrect connection may lead
to the damage of the LED strip.
For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page
of GIGABYTE's website.
• To avoid abnormal LED behavior, do not connect addressable RGB Gen1 LED strips and
addressable RGB Gen2 LED strips to the same header at the same time.
• Before installing or removing the devices, be sure to turn off the devices and your computer.
Unplug the power cord from the power outlet to prevent damage to the devices.
9) SATA3 4/5/6/7 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device. The Intel
RAID 5, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for
instructions on configuring a RAID array.
To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's
website and search for "SATA Configuration" for more information.
ARGB_V2_2
ARGB_V2_2
1
ARGB_V2_1/ARGB_V2_3
7
7
SATA3
SATA3 4/5/6/7
- 23 -
1
Chipset supports RAID 0, RAID 1,
®
1
1
5 7
4 6
Pin No. Definition
1 V (5V)
2 Data
3 No Pin
4 GND
Addressable RGB
Gen2 LED Strip
1
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND