THANK YOU LETTER Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.
SAFETY INSTRUCTIONS Intended Use The product is intended only for home use and for textiles in household amounts suitable for washing. This appliance is for indoor use only and not intended for built in use. Only use according to these instructions. The appliance is not intended for commercial use.
WARNING: Electric Shock Hazard • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.
SAFETY INSTRUCTIONS • The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. • Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa. Electrical Connection • Make sure the supply cable is not trapped by the machine, or it can get damaged. •...
Page 6
-Accumulated water shall be drained out of the machine. • This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door can not be used as a handle. Model Washing Capacity MF100W70BA Series MF100W80BA Series MF100W90BA Series MF100W100BA Series...
PRODUCT OVERVIEW Door Drain hose Power supply cord Detergent dispenser Service flap Control panel NOTE The product picture is for illustration only, please refer to real product as reference. Accessories Acoustic sponge 4 x Cover 1 x Supply hose 1 x Owner’s (optional) caps cold water...
QUICK START GUIDE CAUTION • Before washing, please make sure the machine is installed properly. • Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use.
1. Before Washing 1. Plug in 2. Open tap 3. Load earth terminal 4. Close door 5. Add detergent Main wash Ⅱ Softener Prewash NOTE Detergent need to be added in compartment I if the pre-wash function is selected.
Page 11
2. Washing 1. Select programme 2. Select function or remain default settings 3. Press Start/Pause to start the program 3. After Washing Buzzer beep and “End” on display.
PRODUCT INSTALLATION Tools Needed If Installation By Yourself (not include) Installation Area WARNING • Stability is important to prevent the product from wandering! • Make sure the machine is standing leveled and stable. • Make sure that the product does not stand onto the power cord. •...
Unpacking the Machine WARNING • Packaging material (e.g. Films, Styrofoam) can be dangerous for children. • There is a risk of suffocation ! Keep all packaging well away from children. 1. Remove the cardboard box and styrofoam packing. 2. Lift the machine and remove the base packaging. 3.
PRODUCT INSTALLATION Levelling the Machine WARNING The lock nuts on all four feet must be screwed tightly against the housing. 1. Loosen the lock nut. 2. Turn the foot until it reaches the floor. 3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level using a spirit level.
There are two ways to place the end of drain hose: 1.Put it into the water trough. 2.Connect it to the branch drain pipe of the trough. Water trough Acoustic Sponge NOTE • Please make sure to assemble the acoustic sponges, which can effectively reduce the noise caused by the machine while working, in order to provide you with a more peaceful and quiet living environment.
OPERATION INSTRUCTIONS Before Each Washing • The ambient temperature of the machine should be 5 °C -40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
Detergent Dispenser Pre wash Ⅱ Main wash Softener Ⅱ Release button to pull out the dispenser CAUTION • Detergent only need to be added in compartment I ”after selecting pre-wash “ function. Programme Programme Quick 15' Cotton Cold ℃ Cotton 20 Rapid 45' ℃...
OPERATION INSTRUCTIONS Detergent Recommendation Recommended washing Type of laundry Washing Wash cycles detergent and textile temp. °C Heavy-duty detergent White laundry made Cotton 40 ℃ 40 60 with bleaching agents from boil-proof ℃ Cotton 60 and optical brighteners cotton or linen Colour detergent without Coloured laundry ℃...
Control Panel Turn the appliance on and off. Start/Pause Start or pause your programme. Option This allows you to select additional functions and will light when selected. Programmes Available according to the laundry type.
Page 20
OPERATION INSTRUCTIONS Display Pre Wash Door Lock Extra Rinse Display Wash Time Delay Time Speed Error...
Page 26
Programmes 1) The highest temperature reached by the laundry in the wash cycle for at least 5 minutes. 2) Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved. 3) The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle.
Page 27
OPERATION INSTRUCTIONS Programmes are available according to the laundry type. Programmes Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Cotton This programme is suitable for washing not very dirty clothes, Rapid 45' save more energy and washing. Mixed load consisting of textiles made of cotton and synthetics. Specially for jeans.
Page 29
Spin Speed Spin When needed, the spinning speed can be adjusted pressing the Speed button in the following steps: 0-400-600-800-1000-1200-1400 Delay 1. Select a programme 2.Press the Delay button to choose the delaying time 0-24h 3.Press [Start/Pause] to start the delay operation Delay Choose programme Setting time...
Page 30
OPERATION INSTRUCTIONS Child Lock To avoid mis operation by children. Press [Extra Rinse] and [Pre Wash] Extra simultaneously for 3 sec. Rinse Wash until the buzzer beep. CAUTION When the Child Lock is activated, the display will alternately show “CL” and the remaining time.
Product Fiche a , c Supplier's name or trade mark( ) ( ): a , c Supplier's address( ) ( ): Model identifier( ):MF100W70BA Series General product parameters: Parameter Value Parameter Value Height Width a , c Dimensions in cm( ) ( )
Page 32
Product Fiche a , c Supplier's name or trade mark( ) ( ): a , c Supplier's address( ) ( ): Model identifier( ):MF100W80BA Series General product parameters: Parameter Value Parameter Value Height Width a , c Dimensions in cm( ) ( ) Rated capacity( )(kg) Depth Energy efficiency index( )
Page 33
Product Fiche a , c Supplier's name or trade mark( ) ( ): a , c Supplier's address( ) ( ): Model identifier( ):MF100W90BA Series General product parameters: Parameter Value Parameter Value Height Width a , c Dimensions in cm( ) ( ) Rated capacity( )(kg) Depth Energy efficiency index( )
CLEANING AND MAINTENANCE Cleaning and Care WARNING • Always unplug the appliance and close the water tap before cleaning and maintenance. Cleaning the Cabinet Proper maintenance on the machine can extend its working life. The surface can be cleaned with diluted non- abrasive neutral detergents when necessary.
Page 36
Cleaning the Inlet Filter NOTE • Diminishing water flow is a sign that the filter needs to be cleaned. 1. Close the tap and remove 2. Clean the filter with a brush. the water supply hose from it. 3. Unscrew the water supply 4.
Page 37
CLEANING AND MAINTENANCE Cleaning the Detergent Dispenser 1. Press down the release [ ] on the softener cover and pull the dispenser drawer out of the recess. Clean the inside of the recess with a brush. 2. Lift the softener cover off the dispenser drawer and wash both items with water. 3.
Page 38
Cleaning the Drain Pump Filter WARNING • Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter. • Be careful of hot water. Wait for water cooling down. Risk of scalding! •...
TROUBLE SHOOTING Whenever there is a problem with the appliance, check if you can solve it following the tables below. If the problem persists, please contact the customer service. Description Possible Cause Solution Appliance does Door is not closed Close the door properly not start and restart.
Midea may constitute trademark infringement or unfair competition in violation of relevant laws. This manual is created by Midea and Midea reserves all copyrights thereof. No entity or individual may use, duplicate, modify, distribute in whole or in part this manual, or bundle or sell with other products without the prior written consent of Midea.
DISPOSAL AND RECYCLING Important Instructions for Environment Compliance with the WEEE Directive and Disposing of the Waster Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waster electrical and electronic equipment (WEEE). This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life.
European Economic Area. Further information are provided on request. You can contact our Data Protection Officer via MideaDPO@midea.com. To exercise your rights such as right to object your personal date being processed for direct marketing purposes, please contact us via...
(proof of purchase must be provided). Our General Terms and Conditions apply. Y our device / serial number Purchase date: Place of purchase: Do you have any questions ? We are happy to support you ! http://www.midea.com...
Customer Service Spare parts for your appliance are available for a minimum of 10 years following EU COMMISSION REGULATION 2019/2023 ANNEX II Ecodesign requirements In case of questions, please contact our local customer service center. WARNING Risk of electric shock •...
Need help?
Do you have a question about the MF100W70BA Series and is the answer not in the manual?
Questions and answers