TABLE OF CONTENTS 1. Introduction ....................................1 2. Package Contents ...................................2 3. Product Specifications ................................3 4. Dimensions ....................................3 5. Product Overview ..................................4 6. Controlling The Camera ................................5 7. Installing The Camera ................................6 8. Configuring The Menu Settings ............................8 9. Camera Status & LED Indicators ............................16 10.
These instructions are not applicable to all vehicle types and are provided as guidelines to aid in product installation. If you require assistance with camera installation, please feel free to either consult an experienced technician or reach out to TYPE S customer support at 1.866.294.9244.
2. PACKAGE CONTENTS 1 x TYPE S T401 Dual View Dashcam 2. 1 x 12/24V Power Adapter 3. 1 x Mounting Bracket with 3M VHB™ Double- Sided Tape 4. 1 x Spare 3M VHB™ Double-Sided Tape 5. 2 x Cable Clips 6.
3. PRODUCT SPECIFICATIONS T401 Dual View Dashcam Display: 2.4” Video Resolution: Front Camera – UHD 4K (3840 x 2160) Interior Camera – FHD 1080P (1920 x 1080) Frequency: 2.4GHz Operating Voltage: DC 12/24V / DC 5V (USB-C) Operating Temperature: 14°F~140°F (-10°C~60°C) Lens (View Angle): Front Camera –...
5. PRODUCT OVERVIEW Speaker Power Input Front Camera Display Screen Function Buttons Infrared Sensors Reset Button Interior Camera MicroSD Card Slot (MicroSD Card Factory-Installed) 10. LED Indicators...
6. CONTROLLING THE CAMERA Apply configuration and settings to the camera using the 5 function buttons. Please refer to the section below for the functions of each button under different modes. Function Buttons Video Mode Video Mode Camera Mode Camera Mode Audio Recording On/Off (click once) Open Menu (click once) Switch between Front/Interior/PIP view...
7. INSTALLING THE CAMERA Remove the protective film from the Power up the camera. display screen. MicroSD Card (Factory-Installed) Calibration mode will engage upon Hold the camera against your windshield. initial use. To access it manually, Align the GREEN LINE with the center of please pause recording, go to Menu >...
Page 9
Apply the adhesive film to the selected location, Adjust the camera lens angle, aligning the then attach the camera to its center. LINE with the horizon. NOTE: Click to exit calibration mode. Windshield Route the power cable through the headliner and pillars inside your vehicle. To ensure it doesn’t obstruct the driver’s view, we recommend passing it through the passenger side.
8. CONFIGURING THE MENU SETTINGS Initial Setup Set the date & time before using the camera. The date stamps that appear on all future recordings will follow this setting. You may also sync the date & time to your phone by connecting the camera to the TYPE S Drive App.
Page 11
Camera Mode • Click to enter Camera Mode. • Click to switch between front, interior and picture-in- picture view. • Click to take a photo. Gallery Mode • Click to enter Gallery Mode. • Utilize to cycle through Event, Video, Photo and Parking folders, then click to select.
Page 12
Erase Files • In previews, press and hold to delete the selected file. • Click to confirm the erase. • Click to return to folder selection. Advanced Driver Assistance System (ADAS) The front camera features an AI-powered Advanced Driver Assistance System. For the system to function properly and accurately, please ensure the following conditions are met: •...
Page 13
1. Lane Departure Warning The Lane Departure Warning system alerts you when your vehicle deviates from the driving lane at a speed over 30 MPH (50 KM/H). 2. Stop & Go Stop & Go system notifies you if traffic starts moving, but your vehicle hasn’t.
Page 14
5. Recalibrate AI To recalibrate the camera AI, enter calibration mode. The screen will automatically display calibration lines as guides (refer to page 6). Video Settings 1. Resolution Switch video resolution between 4K + FHD, 2K + FHD and FHD + FHD. 2.
Page 15
6. Time Lapse Select between normal and time lapse video. Time lapse videos are recorded at a lower frame rate to create an accelerated time effect during playback (refer to page 17). NOTE: Please set Motion Detect to OFF to activate the Time Lapse function.
Page 16
General Settings 1. Screen Saver Select the period of inactivity to activate the screen saver. When the screen saver is running, a digital clock will be displayed, and the screen will remain active for any AI warnings. 2. Digital Clock Enable/Disable the digital clock in the screen saver.
Page 17
9. WiFi The auto-sync feature via WiFi allows you to view/manage/ download files onto your smart device wirelessly via the TYPE S Drive App. NOTE: Refer to page 19 for pairing procedure. 10. Format SD Card Format the MicroSD card. This action will erase all data stored on the MicroSD card.
9. CAMERA STATUS & LED INDICATORS Power / Mode Status LED Indicators Power On Red LED light stays on when camera is Camera powers ON when the engine is turned on. powering on. Recording Red LED light flashes. Recording Stopped Red LED light stays on.
13. DOWNLOADING THE APP The auto-sync feature in the TYPE S Drive App allows you to 1) Synchronize the camera's time with your phone's time, 2) Manage the camera's functions from your phone, and 3) View and download recorded videos. To access this feature, scan the QR code below or search for "TYPE S Drive" on the App Store or Google Play.
14. SETTING UP THE APP Auto-sync with the Camera 1. Open the camera’s menu and navigate to General Settings. 2. Go to WiFi. The designated QR code will appear. NOTE: Make sure that WiFi is ON. Android Device 3. Run the TYPE S Drive App. Click Allow in the pop-up message when prompted to allow the App to access...
Page 22
6. Scan the QR code on the camera. 7. After establishing the connection, you will have the ability to view the live feed from the camera through the App. NOTE: After the initial connection, the App retains your camera's network information. This ensures that you will be automatically directed to the live view the next time you connect, eliminating the...
Page 23
6. Scan the QR code on the camera. 7. Click Join in the pop-up message when prompted to connect to the camera’s WiFi network. 8. (Optional) If there is any issue with the auto pairing, exit the App and navigate to the WiFi setting page on your device.
15. USING THE APP Main Interface On-screen Main Menu Instructions Audio Recording Display Mode On/Off Record/Stop Recording Video Mode/ Camera Mode Home Screen Gallery Display Mode Select from 3 different viewing modes. Front Back Front + Back...
Page 25
Change WiFi Password Click to open Main Menu, then navigate to General Settings > Change WiFi Password. Enter your preferred password (must be exactly 8 numeric characters), then click OK. Connect to your camera’s WiFi network again with the revised password. NOTE: It is recommended to reset your WiFi password upon initial connection to protect your data from unauthorized access.
Page 26
SD CARD Click to download the selected file onto your smart device or to delete the file from the MicroSD card. GPS Information Click to play the footage, and click to view embedded GPS location simultaneously during playback. NOTE: The icon will only appear if the GPS signal was present while the recording took place.
16. VIEWING AND MANAGING MEDIA FILES USING A COMPUTER When connected directly to a computer via the cable provided, a pop-up will prompt you to access Mass Storage Mode. Once confirmed, the screen below will show up. The camera will function as a card reader for the computer, and it will appear as a new USB drive.
17. FAQS 1) Problem: The camera does not provide AI warnings when it should after driving for an extended period. Solution: Please 1) Enter calibration mode (Menu – Driver Assistance – Recalibrate AI) and adjust the camera angle up or down slightly, then 2) Check to see if GPS signal is received. 2) Problem: The camera is unable to take pictures or record videos.
Page 29
7. Do not operate the car charger with a damaged cord or cigarette lighter connector – replace the damaged items with new factory replacement items immediately. 8. Do not operate the car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way;...
• There is a plastic cover over the AI Dashcam. Do not scratch the cover when cleaning dirt or snow from it. • If the temperature changes rapidly, the system may not operate normally. • When strong light directly enters a camera, objects may not be displayed clearly. •...
WARRANTY TYPE S • LIMITED WARRANTY TYPE S warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, TYPE S liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and TYPE S makes no other warranty of any kind aside from the limited express warranty stated above.
Page 32
For customer service and technical support, please call us at 1.866.294.9244. If at that time it is determined that a replacement unit is needed, the support representative will issue a Return Authorization and instruct on how to get a new unit. TYPE S makes no other warranty of any kind aside from the limited express warranty stated herein.
20. GENERAL INFORMATION CUSTOMER SERVICE/CONTACT IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE. CONTACT TYPE S DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/ EXCHANGE THE PRODUCT. FCC Compliance Statement: This device complies with Part 15 of the FCC rules.
Page 34
T401 Dual View 4K Dashcam With AI Powered Driver Assistance BT534217 Responsible Party: TYPE S 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626, U.S.A. Tel: 1-866-294-9244 Android is a trademark of Google Inc. iPhone, iPad, Mac and iPod touch are trademarks of Apple Inc.
Need help?
Do you have a question about the T401 and is the answer not in the manual?
Questions and answers