Purchase Details Welcome Congratulations on purchasing your new Portable Air-conditioner! The Sôlt brand is proudly distributed within Australia by Residentia Group Pty Ltd. For future reference, please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. Please refer to the warranty card at the rear of this manual Residentia Group STORE DETAILS...
Page 3
2 Purchase Details This page Contents is intentionally 3 Welcome left blank 6 General Safety Instructions 12 Your Portable Air-conditioner 14 Installation 17 Operation Instructions 21 Maintenance 22 FAQs & Troubleshooting Guide 24 Technical Specifications 25 Attach Your Receipt 26 Warranty Information Customer Care Sôlt recommends the use of original spare parts.
General Safety Instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE – Disconnect: Turn off the unit first and then unplug – Unattended: Do not leave the appliance unattended INSTALLATION it when it is not in use and before maintenance or when in use.
Page 5
WARNING for Using R32/R290 Refrigerant Do not use means to accelerate the defrosting process or to clean, other than those recommended by WARNING for Using R32/R290 Refrigerant Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
Page 6
General Safety Instructions (Continued) Information on servicing (Continued) 12. Cabling finally pulling down to a vacuum. This process shall be liquid charge). 9. Checks to electrical devices Check that cabling will not be subject to wear, corrosion, repeated until no refrigerant is within the system. i.
Installation Ambient Temperat ure Range For Unit Operat ing Installation MODE Temperature Range Installation Consider the following for optimal performance: INSTALLATION LOCATION WINDOW INSTALLATION KIT Once the Exhaust Hose assembly and Adjustable Window Installation Cool 17-35°C (62-95°F) NOTE: Once the Exhaust Hose assembly and Adjustable Win Slider are prepared, choose from one of the following two –...
Page 9
Foam seal C Foam seal C (Non-adhesive type) (Non-adhesive type) Installation (Continued) Operation Instructions 3. Cut the non-adhesive foam seal C strip to match the width(or height) of the window. Insert the seal between the glass and the window frame to prevent air and insects from getting into the room. 5.
Page 10
Operation Instructions (Continued) COOL MODE count down the time remaining until start. • Press the “MODE” button until the “COOL” indicator • The system will automatically revert back to display the previous temperature setting if there is no operation in light comes on.
Operation Instructions (Continued) Maintenance AIR FLOW DIRECTION ADJUSTMENT The louver can be adjusted automatically. Adjust the air flow direction automatically: · When the Power is ON, the louver opens fully. · Press the SWING button on the panel or remote Remove the controller to initiate the Auto swing feature.
FAQs & Troubleshooting Guide Technical Specifications If you experience problems with your portable air conditioner, or it appears not to be operating correctly, check the RATING LABEL COMPLIANCE information below for solutions to common problems. If none of the solutions offered help you solve your problem, This appliance has been fully tested and meets all please contact our after sales support centre on 1300 11 HELP (4357) or emailing support@residentiagroup.com.au requirements as set out by standards AS/NZS 60335.1 and...
Page 13
This page Attach your receipt is intentionally to this page left blank...
Warranty Information You will bear the cost of transportation, travel and For Appliances and services provided by Residentia WARRANTY TERMS & CONDITIONS IN THIS WARRANTY delivery of the Appliance to and from Residentia Group in Australia, the Appliances come with a PORTAblE AIR-CONDITIONERS ‘acceptable quality’...
Page 15
An initiative by Residentia Group T. 1300 11 4357 E. support@residentiagroup.com.au www.solt.house...
Need help?
Do you have a question about the GGSAP3500W and is the answer not in the manual?
Questions and answers