Hitachi Director’s UT32X812 Operating Manual page 37

SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)
Setting Picture Adjustment (continued)
Selected Items
Contrast Mode
3D Color Management
Black Enhancement
3D Comb Filter
Reset
Color Temp. Adjust
Motion Sharpness
It allows you to choose from 3 modes.
Dynamic
Dynamic: Sharpen the gradation to improve the contrast
Normal Normal : Improve the contrast feeling to reproduce a
Linear
Linear
On : It automatically adjusts the suitable tint, color density,
Off
and brightness on images.
Off : Set it off if the image does not look natural.
On
Off
Low
Adjusts the black level compensation.
Middle
High
Off
This function is available only if D-sub 15 pin - composite
cable is used.
Low
This reduces the dot and color blurring in minute scales so
that it can reproduce purer color.
Middle
This is available only when receiving NTSC3.58
composite signal.
High
Each item on this menu screen can be restored to the
factory settings by pressing the
Amplitude
On: When you want to set specific adjustments in each of
the 3 Color Temperature modes. You can adjust on
Red
the Amplitude and Cut Off. The settings reflect on the
Green
Color Temperature.
Amplitude: Subdue the colors (Red/Green/Blue) on
Blue
On Cut Off
Cut Off
Red
Green
Reset (Available when On): Select to restore amplitude
and Cut Off adjustments to default settings by pressing the
Blue
button.
OK
Reset
Off: Remains as default setting.
Off
On : Set to On to reproduce clearly the image with fast
Off
movement
Off : Set it off if the image does not look natural or flicker
On
appears.
Setup hint
feeling.
faithful gradation.
: Reproduce as faithful gradation as possible.
OK
the brighter parts (-63~0).
: Subdue the colors (Red/Green/Blue) on
the darker parts (-31~+31).
button.
36