Table of Contents
Advertisement
Quick Links
Projector
CP-RX82
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING
product. Be sure to read "Safety Guide" first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
CAUTION
NOTICE
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
®
• Mac
is a registered trademark of Apple Inc.
®
• Microsoft
, Internet Explorer
trademarks of Microsoft Corporation in the U.S. and/or other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
TM
• Blu-ray Disc
and Blu-ray
All other trademarks are the properties of their respective owners.
►Before using this product, please read all manuals for this
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
®
, Windows
TM
are trademarks of Blu-ray Disc Association.
®
and Windows Vista
®
are registered
1
Advertisement
Table of Contents
Related Manuals for Hitachi CP-RX82Z
Summary of Contents for Hitachi CP-RX82Z
-
Page 1: Operating Guide
Projector CP-RX82 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. -
Page 2: Table Of Contents
Contents Contents Introduction . . . . . . . . . . . . . . . 3 PICTURE menu . . . . . . . . . . . . 26 Features . -
Page 3: Introduction
Introduction Introduction Features The projector provides you with the broad use by the following features. ü This projector realizes the large projection image, even if in a small space. ü This compact, lightweight projector uses a front exhaust system that keeps the user comfortable by directing hot air away from the user. -
Page 4: Part Names
Part names Part names Projector HOT! (2) (3) (11) (1) Lamp cover (53) The lamp unit is inside. (2) Focus ring (17) (15) (3) Zoom ring (17) (10) (4) Control panel (5) (5) Elevator buttons (x 2) (17) (6) Elevator feet (x 2) (17) (12) (7) Remote sensor (12) HOT! -
Page 5: Control Panel
Part names Control panel (1) STANDBY/ON button (13) (2) INPUT button (14, 22) (3) MENU button (22) It consists of four cursor buttons. BLANK button (21) (5) POWER indicator (11, 13, 59) (6) TEMP indicator (59) (7) LAMP indicator (59) Rear panel 9 (1) VIDEO port... -
Page 6: Remote Control
Part names Remote control (1) VIDEO button (15) (10) (2) COMPUTER button (15) (3) SEARCH button (16) MY SOURCE/ VIDEO COMPUTER DOC.CAMERA (4) STANDBY/ON button (13) ASPECT AUTO SEARCH BLANK (16) (12) (5) ASPECT button (16) PAGE VOLUME MAGNIFY FREEZE (14) (6) AUTO button (18) DOWN... -
Page 7: Setting Up
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) - Page 8 Setting up Arrangement (continued) WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock.
-
Page 9: Connecting Your Devices
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. - Page 10 Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.
-
Page 11: Connecting Power Supply
Setting up Connecting power supply Put the connector of the power cord into the AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. -
Page 12: Remote Control
Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. Replace the battery cover in the direction of the arrow and snap it back into place. -
Page 13: Power On/Off
Power on/off Power on/off STANDBY/ON button Turning on the power POWER indicator Make sure that the power cord is firmly and correctly connected to the projector and the outlet. Make sure that the indicator is POWER steady orange (59). MY SOURCE/ VIDEO COMPUTER DOC.CAMERA... -
Page 14: Operating
Operating Operating Adjusting the volume VOLUME +/- button Use the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the MY SOURCE/ VIDEO COMPUTER DOC.CAMERA AUTO volume. If you do not do anything, the dialog will automatically ASPECT SEARCH BLANK... - Page 15 Operating Selecting an input signal (continued) Press COMPUTER button on the remote control to select COMPUTER button the COMPUTER IN port. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA AUTO ASPECT SEARCH BLANK PAGE VOLUME MAGNIFY FREEZE DOWN KEYSTONE MY BUTTON MUTE MENU POSITION ENTER Press VIDEO button on the remote control.
-
Page 16: Searching An Input Signal
Operating Searching an input signal SEARCH button Press SEARCH button on the remote control. The projector will start to check its input ports as below in MY SOURCE/ VIDEO COMPUTER DOC.CAMERA order to find any input signals. ASPECT AUTO SEARCH BLANK When an input is found, the projector will stop searching MAGNIFY... -
Page 17: Adjusting The Projector's Elevator
Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within degrees. -
Page 18: Using The Automatic Adjustment Feature
Operating Using the automatic adjustment feature AUTO button Press AUTO button on the remote control. Pressing this button performs the following. MY SOURCE/ For a computer signal VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK The vertical position, the horizontal position and the horizontal PAGE VOLUME MAGNIFY... -
Page 19: Correcting The Keystone Distortions
Operating Correcting the keystone distortions KEYSTONE button Press KEYSTONE button on the remote MY SOURCE/ control. A dialog will appear on the screen to VIDEO COMPUTER DOC.CAMERA aid you in correcting the distortion. AUTO ASPECT SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME Use the ◄/►... -
Page 20: Using The Magnify Feature
Operating Using the magnify feature MAGNIFY ON/OFF button Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear MY SOURCE/ COMPUTER VIDEO DOC.CAMERA on the screen. When the MAGNIFY ON button is pressed for ASPECT AUTO SEARCH... -
Page 21: Temporarily Freezing The Screen
Operating Temporarily freezing the screen FREEZE button Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen (however, MY SOURCE/ COMPUTER VIDEO DOC.CAMERA the indication will not appear when the OFF is selected for ASPECT AUTO SEARCH... -
Page 22: Using The Menu Function
Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, SECURITY and MY SOURCE/ EASY MENU. COMPUTER VIDEO DOC.CAMERA EASY MENU consists of functions often used, and the other menus are classified ASPECT AUTO SEARCH... - Page 23 Operating Using the menu function (continued) To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ●...
-
Page 24: Easy Menu
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description Using the ◄/► buttons switches the mode for aspect ratio. ASPECT See the ASPECT item in IMAGE menu (29). -
Page 25: Co Mode
EASY MENU Item Description Using the ◄/► buttons changes the eco mode setting. ECO MODE See the ECO MODE item in SETUP menu (34). Using the ◄/► buttons switches the mode for mirror status. MIRROR See the MIRROR item in SETUP menu (34). Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. -
Page 26: Picture Menu
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. -
Page 27: Olor Temp
PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH 1 CUSTOM 2 MID 2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM 5 CUSTOM 5 Hi-BRIGHT-2 4 CUSTOM 4 Hi-BRIGHT-1 ... - Page 28 PICTURE menu Item Description This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function. SAVE-1 ó SAVE-2 ó SAVE-3 ó SAVE-4 LOAD-4 óLOAD-3 ó...
-
Page 29: Image Menu
IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. - Page 30 IMAGE menu Item Description Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker. Right ó Left H PHASE • This item can be selected only for a computer signal or a component video signal. Using the ◄/► buttons adjusts the horizontal size. Small ó...
-
Page 31: Input Menu
INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. -
Page 32: Ideo Format
INPUT menu Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. S-VIDEO ó VIDEO (2) Using the ◄/► buttons switches the mode for video format. VIDEO FORMAT AUTO ó... - Page 33 INPUT menu Item Description The resolution for the COMPUTER IN input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
-
Page 34: Setup Menu
SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. - Page 35 SETUP menu Item Description While the image signal from the input port chosen in step (1) is projected, the image signal from the input port selected in step (2) is output to MONITOR OUT port. (1) Choose a picture input port using ▲/▼...
-
Page 36: Audio Menu
AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. -
Page 37: Screen Menu
SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. -
Page 38: Myscreen
SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. - Page 39 SCREEN menu Item Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When the ON is selected, the item MyScreen is locked. Use this MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu (49).
- Page 40 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼...
- Page 41 SCREEN menu Item Description Using the ▲/▼ buttons switches the mode for the template screen. Press the ► button to display the selected template, and press the ◄ button to close the displayed screen. The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed (45).
- Page 42 SCREEN menu Item Description The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C.
-
Page 43: Option Menu
OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. - Page 44 OPTION menu Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically. AUTO POWER When the time is set to 1 to 99, and when the passed time with no- signal or an unsuitable signal reaches at the set time, the projector...
- Page 45 OPTION menu Item Description You can use this item to assign one of the following functions to the BLANK button on the control panel (5) and the MY BUTTON 1/2 buttons on the remote control (6). (1) Choose a button to assign a function from BLANK, MY BUTTON-1 and MY BUTTON-2.
- Page 46 OPTION menu Item Description Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
- Page 47 OPTION menu Item Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When ON is selected, the buttons on the projector except the STANDBY/ON button are locked. ON ó OFF • Please use this function to prevent tampering or accidental operation.
-
Page 48: Security Menu
SECURITY menu SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. To use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. - Page 49 SECURITY menu Item Description The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
- Page 50 SECURITY menu Item Description PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 Turning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/ off menu.
-
Page 51: Y Text Password
SECURITY menu Item Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •... -
Page 52: My Text Writing
SECURITY menu Item Description (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off. -
Page 53: Maintenance
Maintenance Maintenance Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. -
Page 54: Lamp Warning
Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. -
Page 55: Cleaning And Replacing The Air Filter
Maintenance Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number. -
Page 56: Filter Time
Maintenance Cleaning and replacing the air filter (continued) Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button. A dialog will appear. -
Page 57: Other Care
Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. -
Page 58: Troubleshooting
Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet. -
Page 59: Regarding The Indicator Lamps
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP Description indicator indicator indicator Lighting Turned Turned The projector is in a standby state. Please refer to the section “Power on/off”. -
Page 60: Resetting All Settings
Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector to cool down at least Blinking 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. -
Page 61: Phenomena That May Be Easy To Be Mistaken For Machine Defects
Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. Correctly connect the power cord. - Page 62 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. Correctly connect the audio cables. The MUTE function is working. Restore the sound pressing the MUTE or VOLUME +/- button on the remote control.
- Page 63 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The brightness and/or contrast are adjusted to an extremely low level. Adjust the BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function.
- Page 64 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.
-
Page 65: Specifications
Specifications Specifications Specifications Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp 200 W UHB Speaker Power supply AC 100-120 V/2.9 A, AC 220-240 V/1.4 A Power consumption AC 100-120 V/290 W, AC 220-240 V/270 W Temperature range 5 ~ 35 °C (Operating) 306 (W) x 77 (H) x 221 (D) mm... - Page 66 Specifications Specifications (continued) [unit: mm]...