Maintenance; Specification; Appliance Weight Table - Falcon ONE Series User, Installation And Servicing Instructions

E161i & E163i - The air filter is located at the rear of the unit. It can be removed by sliding upwards from
the guide. Clean using hot soapy water and refit after drying.
E1403i – the air filters are located under the unit. Slide forwards to remove.
5.1.7 Clean the Ceran-glass hob with hot soapy water and a soft cloth. DO NOT USE metal scrapers.
5.1.8 Enamelled surfaces within oven chamber approved cleaning agents which bear the Vitreous
Enamel Development Centre (VEDC) mark are recommended.
5.1.9 Oven chamber - Wipe enamelled surfaces clean while still warm. Use a soft cloth and hot soapy
water. Badly stained removable parts should be soaked in hot water with an approved detergent using
nylon or scotch cleaning pads will provide good results.

5.2 MAINTENANCE

5.2.1 E161i & E163i - Oven door catch may need to be occasionally lubricated. Push down on roller
and apply high melting point lubricant inside the catch and onto roller itself.
5.2.2 If there are issues with closing of the door, try adjusting the catch Use your hands or an
appropriate implement to push down on the roller 1 as shown. Whilst holding it down, turn it right 2 to
adjust it down, or left 3 to adjust it up as shown.

6.0 SPECIFICATION

6.1 APPLIANCE WEIGHT TABLE

APPLIANCE
E161i
E163i
E143i
UNIT WEIGHT (kg)
116
116
72
PACKED WEIGHT (kg)
137
137
82.5
23