Tv Audio Connection; Connecting Tv Audio - HP z553 User Manual

TV Audio Connection

You can connect your TV, monitor, or display audio
directly to your HP Digital Entertainment Center for
two-speaker sound.

Connecting TV Audio

To connect the audio directly to a TV or monitor:
Connect an RCA stereo cable (White: Left;
■
Red: Right) from the HP Digital Entertainment Center
back panel Audio Out connector to a TV Audio In
connector.
The following diagram shows a basic TV audio installation:
AUDIO IN
Basic TV audio setup (2.0)
TV
Choose one
AUDIO IN AUDIO 7.1 PRE-OUT
SURROUND SURROUND CENTER FRONT
BACK
L L L L
100-240V- 4/A 50/60Hz
R R R SUB R
AC IN WOOFER
COAXIAL
OPTICAL
AUDIO
DIGITAL HI SPEED USB 2.0 1394
OUT
If your TV has multiple inputs, you can use your TV as a
switch for audio and video.
Refer to the Start Here booklet that came with the
HP Digital Entertainment Center.
For additional information on connecting the speakers,
refer to the documentation that came with your speakers
and AV receiver.
TV
AUDIO/VIDEO IN
VIDEO OUT
Y
VIDEO
Pb
TV SOURCE 1 IN
DVI R
Pr
AUDIO
S-VIDEO COMPONENT VGA
TV SOURCE 2 IN
10/ 100/ 1000
R AUDIO
ETHERNET DIGITAL VIDEO OUT
SCART
*
adapter
*
Used to connect
audio and video to
TVs that only have a
20-pin SCART input.
WIRELESS LAN 802.11 b/g
REMOVABLE ANTENNA
ACTIVITY
LINK
TV ANTENNA IN FM ANTENNA IN
L
Ω
DUAL 75
VIDEO S-VIDEO COAXIAL
TUNER
L S-VIDEO
INFRARED TRANSMITTER OUT
2 1
Connecting Audio
41