HP iPAQ h3900 Getting Started Manual page 12

GS 8x5.book Page 12 Friday, February 14, 2003 3:45 PM
1 Press the Power button to turn on the screen
2 Follow the instructions on the Welcome screens
Change the backlight settings
1 From the Start menu, tap Settings
12
2 Tap System
3 Tap Backlight
4 Select the backlight settings
On the Battery Power tab, select when to use the
backlight on battery power
On the External Power tab, select when to use the
backlight on external power
On the Brightness tab, select the level of brightness for
the backlight
Hint: Slide the bar to the lowest level to conserve the
most power
Tips
I cannot see anything on the screen
1 Make sure the screen is on
Press the power button
2 Make sure the Compaq iPAQ Pocket PC is
connected to the AC adapter and the universal
cradle
Plug the AC adapter into an outlet
Insert the DC plug into the DC jack on the back of the
universal cradle
Insert the AC adapter plug into the DC adapter plug
I cannot keep my battery charged
Always keep the Compaq iPAQ Pocket PC connected to a
universal cradle or AC adapter when you are not using it
In the backlight settings slide the bar to the lowest level to
conserve the most power
I do not see the charge light blinking when my
Compaq iPAQ Pocket PC is connected to the
universal cradle
1 Make sure the universal cradle is plugged into an
outlet
2 Make sure the bottom of your Compaq iPAQ
Pocket PC is pushed firmly into the universal cradle
3 Determine if the unit is fully charged. The charge
light does not blink when the unit is fully charged.
From the Start menu, tap Settings
Tap System
Tap Power