Connecting The Power Cords - HP Kayak XW A2-U2-W2 User Manual

Display Power Connector
WARNING
1 Setting Up and Using Your PC Workstation

Connecting the Power Cords

Connecting the Power Cords
1 Remove any warning labels that may be covering the computer's
power connector on the rear of the computer.
2 Connect the power cords to the display and the computer. (The
connectors are shaped to go in one way only.)
3 Connect the display's power cord and the computer's power cord to
grounded outlets.
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such
as the one provided with this equipment, or one in compliance with
your national regulations. This PC Workstation is disconnected from
the power by removing the power cord from the power outlet. This
means the PC Workstation must be located close to a power outlet that
is easily accessible.
8 English
Computer Power Connector
Grounded Outlet