Datalogic DS1500 Reference Manual page 53

TECHNICAL FEATURES
SOFTWARE FEATURES
READABLE CODE SYMBOLOGIES
* EAN/UPC
EAN/UPC (including Add-on 2 and Add-on 5)
* 2/5 Interleaved
* Code 39 (Standard and Full ASCII)
* Codabar
*ACB Readable. Other symbologies available on request.
Code Selection
Decoding Safety
Headers and Terminators
Operating Modes
Configuration Modes
Special Functions
Parameter Storage
ENVIRONMENTAL FEATURES
Operating temperature
Storage temperature
Humidity max.
Vibration resistance
EN 60068-2-6
2 hours on each axis
Shock resistance
EN 60068-2-27
3 shocks on each axis
Protection class
PHYSICAL FEATURES
Mechanical dimensions
Weight without cable
The features given are typical at a 25 ° C ambient temperature (if not otherwise
Note 1:
indicated).
Further details given in par. 3.3.
Note 2:
If the reader is used in high temperature environments (over 40 ° C), it is advised the
Note 3:
use of the Beam-shutter (see the WinHost configuration program) and/or a thermal
conductive support (such as the metal bracket provided).
up to six different codes during one reading phase
can enable multiple good reads of same code
up to four headers and four terminators
On-Line, Serial-On-Line, Automatic, Continuous, Test
• through menus using WinHost utility
• receiving commands from one of the serial ports (HOST
MODE)
ACB (Advanced Code Builder)
Motor Off
Non-volatile internal EEPROM
0° to 45 ° C (32° to 113 °F)
(Note 3)
-20° to 70 ° C (-4° to 158 °F)
90% non condensing
14 mm @ 2 to 10 Hz
1.5 mm @ 13 to 55 Hz
2 g @ 70 to 200 Hz
30 g; 11 ms
IP65
40 x 30 x 22 mm (1.57 x 1.18 x 0.86 in)
44 g (1.55 oz)
* Code 93
* Code 128
* EAN 128
ISBT 128
Pharmacode
6
41