Morita Veraview IC5 HD Instructions For Use Manual page 35

Rapid Beeping
All LEDs
Blink Red
Rapid Beeping
8 LEDs
Blink Red
Rapid Beeping
6 LEDs
Blink Red
Operation Panel Error Signals
System Errors
Rapid beeping and all LEDs blinking indicate a system error.
(Possible Causes)
• Malfunction during transmission to computer.
• Problem with X-ray unit's transmission circuitry
(Response)
Turn the X-ray unit off and restart the i-Dixel application. Then check
the connections between the unit and the computer. Turn the X-ray
unit back on. If this does not solve the problem, contact your local
dealer or J. MORITA OFFICE.
Error C3
Rapid beeping and 8 LEDs blinking in the pattern shown to the left
indicate error C3.
(Possible Causes)
• Disconnected LAN cable between X-ray unit and HUB
• HUB is not turned on.
(Response)
• Check cable connection between X-ray unit and HUB
• Make sure HUB is turned on.
Error C4
Rapid beeping and 6 LEDs blinking in the pattern shown to the left
indicate error C4.
(Possible Causes)
• Disconnected LAN cable between computer and HUB
• Computer is not turned on.
(Response)
• Check cable connection between computer and HUB
• Make sure computer is turned on
33