Indian Motorcycle Scout 2025 Service Manual page 397

T T R R I I P P L L E E C C L L A A M M P P R R E E M M O O V V A A L L
WARNING
This procedure requires raising and supporting
the motorcycle so that the front wheel is off the
ground. Precautions should be taken to ensure
the motorcycle is properly stabilized at all times.
Failure to properly support motorcycle may result
in personal injury or damage to the motorcycle.
CAUTION
Do not twist the brake hose or brake line. Do not
allow calipers to hang from the brake hose. Secure
calipers in such a way to avoid hose damage.
CAUTION
CALIFORNIA MODELS: Remove the charcoal canister
prior to raising motorcycle wheels off the ground. As
the swingarm lowers it can contact the canister hose
fittings and damage them.
1. Secure the motorcycle in an upright position with
tie-down straps and a platform jack positioned
beneath the engine cases.
IMPORTANT
Do not operate the front brake lever with the calipers
or wheel removed.
2. Remove the front fender. See Front Fender
Removal page 7.20.
3. Remove front wheel. See Front Wheel Removal
page 8.36.
4. Remove Speedometer assembly.
5. Remove Headlight assembly.
6. Remove the handlebar / riser assembly. See
Handlebar Removal page 8.25.
9941686 R01 - 2025 Indian Scout Service Manual
© Copyright Polaris Industries Inc.
STEERING / SUSPENSION / WHEELS / TIRES
7. Remove fork tubes. See Front Fork Removal page
8.41.
8. Remove brake line guides from upper and lower
triple clamp.
q
9. Remove center nut and washer on upper triple
clamp.
10. Slide upper triple clamp off steering stem.
8
8.65