Advertisement
Quick Links
Advertisement
Related Manuals for Livall PikaBoost 2
Summary of Contents for Livall PikaBoost 2
- Page 1 Quick Guide Always follow the latest online instructions for operation. This manual is the initial version and may be subject to updates and adjustments. For the latest information, please refer to the latest version of the online manual. Version: v1.1 Revised Date: Sept.
- Page 2 To Prepare the List PikaBoost Wrench Anti-theft screw x4...
- Page 3 Compatible Parameter of the Seat Post Diameter: Shape: 25.4~34.9mm Round shape & D-shape *Not compatible with carbon seatposts.
-
Page 4: Preparatory Work
PikaBoost housing till the LED light 2 Download the APP. 3 Connect the PikaBoost with your phone. LIVALL Riding APP • Turn on the phone's Bluetooth, enter the APP and go to the page, tap on PikaBoost to connect. - Page 5 4 Select your riding region in the APP. • Go to the PikaBoost page, tap on the icon in the upper right corner, select the correct one in “Region”. PikaBoost PikaBoost Device Upgrade Change Password Region 5 Check if the bicycle seat post is fully locked.
- Page 6 Install the PikaBoost Check if the seat post is firmly Align tightened Screw in alternately Make sure the seat To guarantee the Align PikaBoost's tire Fully tighten the post lock is securely uniform forces, with the rear tire of screws on the unit tightened for a safe alternately screw in the bike.
-
Page 7: Inspection Steps
Inspection Steps After successful installation, to ensure safe riding, check the fit between the PikaBoost tire and the bicycle rear tire. Hold the middle bottom Solid Fit When lifting the PikaBoost with your hand, the bicycle's rear tire will also be lifted. Weak Fit When lifting the PikaBoost with your hand, the bicycle's rear tire does not make contact with it. - Page 8 1. Park the bicycle on a level surface and make sure it is standing upright. Do not tilt the bike. 2. Enter the LIVALL Riding APP, go to the PikaBoost page, tap on the Horizontal Calibration button, and start the calibration process.
-
Page 9: Riding Modes
Riding Modes PikaBoost introduces two types of riding assistance. The primary type is a Smart Assist Ride, which Free Cruise modes.The secondary type is an Auto Assist Ride, which includes three ride modes. 1 Smart Assist Ride There are three riding modes available on this assistance type, and you can easily switch between them using the APP. Riding Modes Details Note... - Page 10 2 Auto Assist Ride For your riding safety, when using Free Cruise mode, a remote control with brake detection must be installed. Remote Controller Riding Modes Details Note • PikaBoost provides assistance a few seconds after the ride enables fully automatic riding. The choice between the two riding modes is •...
- Page 11 Notes: 1. Whenever you're not riding the PikaBoost, such as when you're manually pushing the bicycle, always remember to switch it to standby mode. This can be done with a single press of the button on the remote controller, or via APP, ensuring your safety as well as the safety of those around you. 2.
- Page 12 Remove the battery box (if necessary) Long-press to power off 1. Power off - Long-press the 2. Open the housing lid. 3. Pull the handle and take out power button on PikaBoost the battery box . housing till the power indicator comes off.
- Page 13 Charge the PikaBoost Battery Case PikaBoost Connect the provided USB-C charging cable to the USB-C port on the PikaBoost device/ battery compartment and to a 5V~2 V charger (not included). Plug the charger into a power outlet. Charging will begin, and the power indicator light will flash in green. WARNING: For your safety, it is prohibited to disassemble or modify the battery...
- Page 14 PikaBoost Info Weight 3kg/ 6.6lbs Dimension 436*89*131mm 32km/h(can vary between countries) Top speed 250W Power Charging port Type-C Package Content PikaBoost x1 Fixed cover x1 Remote Controller x1 USB-C Charging Cable x1 wrench x1 Mudguard x1 Quick Guide x1 Anti disassembly screws x4...
- Page 15 Safe Operating Tips •n non-riding situations, always switch the PikaBoost from riding mode to standby mode by using the remote controller or APP. This prevents PikaBoost from providing assistance to the bicycle by starting the motor while walking, which could pose a risk of serious injury or death. •Due to the added weight of PikaBoost on bicycles, it is not recommended to use this product for large jumps or stunts of any kind.
- Page 16 •Any non-original modifications or alterations made to your PikaBoost may void the warranty and result in an unsafe riding experience. •As a user, you have the primary responsibility for operating PikaBoost safely. Always stay alert and aware to avoid any risky behaviors, and comply with traffic regulations. •To prevent unauthorized use, always remove the battery pack from PikaBoost on your bicycle and store it in a safe place when not in use.
- Page 17 Disclaimer: THE MANUFACTURER, SELLER, AND DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY ACCIDENTS, INJURIES, OR PROPERTY DAMAGE CAUSED BY IMPROPER USE, OPERATION, OR RIDING. Please note that this statement is intended to remind you to use PikaBoost and the detachable power battery (lithium battery) correctly and safely to reduce potential risks and damages.
- Page 18 Local Laws The regulations regarding the use and operation of E-bike conversion kits may vary depending on the country, state/province, and city of residence. In many cases, the regulations for using E-bike conversion kits are the same as those for regular bicycles. However, each jurisdiction may have laws regarding permits and regulations for E-bike conversion kits, areas where they can be ridden, minimum riding age, or required equipment (such as helmets).
-
Page 19: Safety Information
Safety Information •Keep the product dry. Do not use the product in places with dust, moisture, or dirt to avoid internal circuit malfunctions. •Do not use this product during thunderstorms. Thunderstorms may cause equipment malfunctions or motor hazards. •Do not use the PikaBoost to supply power when rainy riding. Dry your USB-C charging port before charging if there are water stains. - Page 20 •Do not throw the battery into the fire. Do not disassemble, drop, crush, or modify the battery. Do not insert foreign objects or puncture the battery. •Do not immerse the battery in water or other liquids. Avoid external impacts, pressure, or severe collisions on the battery to prevent leakage, overheating, fire, or explosion.
- Page 21 Warning NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 22 Bluetooth BLE 2402-2480MHz -3.30dBm Hereby, LIVALL Tech Co., Ltd. declare that the radio equipment type Pikaboost is compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://livall. com/pages/product-documents. FCC ID: 2AEKF-L4P01...
-
Page 23: Warranty Policy
• For product malfunctions, please contact LIVALL customer support directly. For more details, visit livall. com or livall-pikaboost.com, or email pikaboost@livall.com. • The warranty period of the product is subject to the warranty period announced by LIVALL on the official website. - Page 24 • Products without the LIVALL logo. Non-LIVALL accessories or user-replaced accessories which have not been purchased from LIVALL or a LIVALL authorized seller. • Cleanliness or regular maintenance of the product. • Consumable materials (such as natural consumption, wear and tear, and aging of the housing, plug- in parts, and battery cells), malfunction or damage caused by incorrect installation, operation (such as mixing battery cells when replacing them, etc.), or use in an operating environment other than that...
- Page 26 Assembly Video & Online Resources Links Scan the QR Code or go to the "Support" section of the livall.com or livall-pikaboost.com © Copyright LIVALL 2024.
Need help?
Do you have a question about the PikaBoost 2 and is the answer not in the manual?
Questions and answers