Cip Status Codes - Panasonic FP0H User Manual

6.8 CIP Status Codes

6.8 CIP Status Codes

Status Status name
code
0x00 Success
0x01 Communications
Related Problem
0x02 Resource unavailable
0x03 Invalid parameter value
0x04 Path segment error
0x05 Path destination
unknown
0x06 Partial transfer
0x07 Connection lost
0x08 Service not supported
0x09 Invalid attribute value
0x0A Attribute list error
0x0B Already in requested
mode/state
0x0C Object state conflict
0x0D Object already exists
0x0E Attribute not settable
0x0F Privilege violation
0x10 Device state conflict
0x11 Reply data too large
0x12 Fragmentation of a
primitive value
0x13 Not enough data
0x14 Attribute not supported
0x15 Too much data
0x16 Object instance does not
exist
0x17 Service fragmentation
out of sequence
0x18 No stored attribute data
6-34
Description
The service was executed successfully by the specified object.
Connection related service failed in connection path.
There were no resources necessary for the object to execute the
requested service.
Concerning what value to use for this state, refer to status code 20
(hexadecimal number).
The processing node was unable to recognize the path segment
identifier or segment syntax.
When a path segment error occurs, the path processing stops.
The path is referring to an object class, instance, or structure element
that is unknown or not included in the processing node. When a path
destination unknown error occurs, the path processing stops.
Only part of the expected data was transmitted.
The messaging sending connection was lost.
The requested service is not implemented. In other words, the service
is not defined for this object class or instance.
Invalid attribute data was detected.
The status of the attribute in Get_Attribute_List or Set_Attribute_List
response is other than zero.
The object is already in the mode or state requested by the service.
The object cannot execute the requested service in the current state.
An object instance that was requested to be created already exists.
A request to change an unchangeable attribute was received.
Failed to pass verification in permission and privilege.
The device cannot execute the requested service in the current mode
or state.
The size of data sent to a response buffer is larger than the allocated
size of the response buffer.
The service specified fragmentation of a primitive data value (e.g.:
REAL data type division).
The service was unable to provide enough data to execute the
specified process.
The attribute specified by the request is not supported.
The service provided more data than expected.
The specified object does not exist in the device.
The fragmentation sequence of this service is currently inactive for this
data.
The attribute data of this object has not been saved before the
requested service is executed.
WUME-FP0HEIP-06