Cisco VG248 - Gateway Software Configuration Manual page 79

Chapter 5 Integrating Cisco CallManager with Voice Mail Systems Using SMDI
Step 1 From Cisco CallManager, choose Devices > Add a New Device.
Choose Cisco VGC Phone from the Phone type menu.
Step 2
Step 3 Click Next.
Enter a Description for this port in the Description field such as voice mail system
Step 4
port x, where voice mail system is the name of your voice mail system and x is the
port number on the VG248. For example, Generic Voice Mail port 1.
Note
Enter the MAC address in the MAC Address field.
Step 5
Each port must have a unique MAC address. Use this formula to calculate the
MAC address for each port.
•
•
•
For example, if the MAC address on the VG248 is 000039A44218
address registered for this port in Cisco CallManager is 0039A4421800.
Select a Calling Search space that enables this MWI port to access all phones on
Step 6
which it might need to set or clear MWI commands.
Step 7 Click Update.
OL-1209-02
This description is particularly useful if you are using the VG248 for
analog and SMDI ports. Cisco CallManager does not distinguish
between these two types of VGC phone types, and this description can
help you quickly see which ports are used for analog devices and
which are used for SMDI voice mail
The first two digits of the MAC address are dropped.
The number is shifted two places to the left.
00 is added to the right.
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Configuring VG248 SMDI Ports in Cisco CallManager
the MAC
,
5-15