Top Level Command Set
Privileged Command Set
clear interface statistics
Usage Guidelines
Related Commands
clear ip routes
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-68
Use Privileged mode commands to view and edit device-specific configuration
information. Enter Privileged mode for a device by using the enable command in
Non-Privileged mode. All Non-Privileged commands are also available.
Resets all interface statistics for the device.
clear interface statistics
Availability: Serial, Telnet; FIPS Mode (serial only)
show interface (Non-Privileged Command Set)
show interface errors (Non-Privileged Command Set)
show interface statistics (Non-Privileged Command Set)
interface (Configuration Command Set)
See "Interface Configuration Command Set".
Clears the IP routing table on the device.
clear ip routes
Availability: Serial, Telnet; FIPS Mode (serial only)
show ip routes (Non-Privileged Command Set)
show routes (Non-Privileged Command Set)
ip route (Configuration Command Set)
Appendix C
Command Summary
78-13124-06