Safety information Important safety information This owner’s guide includes information for Regulatory Model(s): Robot: RVE-Y2 | Dock: ADJ-Ny (y=1-3) | Battery: ABL-H, ABL-F, ABL-D2Ax, ABL-D2Bx (x = 1 or 2) | Robot Radio Module: 6233E-UUB SAVE THESE INSTRUCTIONS WARNING: When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS WARNING: to reduce the risk of injury or damage, read and follow the safety precautions when setting up, using, and maintaining your robot.
Page 3
• If the room to be cleaned contains equipment, such as a stove, fan, space heater, or humidifier, remove the equipment before operation. There is a risk of injury, accident or malfunction if the robot comes in contact and pushes the equipment. For more information, visit global.irobot.com...
Page 4
• Do not pour any liquids into the device and do not immerse in water. directions carefully. • Do not use outdoors or on wet surfaces. • Only use authorised cleaning solutions found on answers.irobot.com/s/ • Do not allow to be used as a toy. Close attention is necessary when used roomba-combo-cleanser.
Page 5
• The battery pack must be removed from the robot before recycling or disposal. • For best results, only use the iRobot Lithium Ion Battery that comes with the robot. • Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product.
Getting started Position the AutoEmpty dock Plug in the dock Good Wi-Fi® Coverage 0.3 m (1 ft) above 1.5 ft (0.5 m) 4 ft (1.2 m) both sides from stairs 4 ft (1.2 m) in front Plug the power cord into the dock, then into the wall. Wrap the cord back so it won’t get in the way of the robot as it comes and goes.
Page 7
Wake up the robot Download the iRobot Home App Scan the QR code with the camera on your mobile device or find the iRobot Home App in your app store. • Follow step-by-step instructions to set up your robot. • Set an automatic cleaning schedule and customize cleaning preferences.
About your robot Top view Bottom view Clean button Multi-Surface Brushes Brush Caps Wall follow sensor Caster Wheel Floor Tracking Sensor Camera Cliff Sensor Brush Frame Release Tab Edge-sweeping brush Charging Contacts Dust Bin & Filter Bin Release Button Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner’s Guide...
Page 9
About your Combo™ bin Top view Bottom view Filter Dust bin door Pad attachments Pad track Dust bin Tank cap Wick cap Water tank Pad plate Mopping pad For more information, visit global.irobot.com...
Page 10
About your dock Front view Back view Canister Lid Pull Tab Cord Wrap Exhaust Vent LED Indicator IR Window Visual Docking Target Charging Contacts Debris Evacuation Port Wheel Wells Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner’s Guide...
Page 11
Top view Bottom view Bag Storage Compartment Bag Guide Rails Debris Evacuation Tube Blower Cover Bag Presence Sensor Debris Evacuation Tube For more information, visit global.irobot.com...
Page 12
Charging Light Ring: Charging in progress Standby mode The robot uses a small amount of power whenever it is on the dock. You can put Sweeping white: charging the robot in a further-reduced power state when not in use. For instructions and •...
Page 13
After 90 minutes of inactivity off the dock, the robot will automatically end its cleaning job. If you are unsure if the robot is finished or paused, visit the iRobot Home App to check on its status.
Page 14
A full list of compatible cleaning solutions can be found on http:// Remove the Dust Bin from the robot, and install the Combo™bin. answers.irobot.com/s/roomba-combo-cleanser or by visiting the app. Please do not use other cleaning solutions or bleach- based products.
Page 15
Open bin door to empty bin. NOTE: If you place your robot on the dock by hand, it will not empty automatically. In this case, use the iRobot Home App or hold the clean button down for 2-5 seconds. For more information, visit global.irobot.com...
Page 16
To keep your robot at optimal performance, make sure you periodically perform the following basic care & maintenance. There are additional instructional videos in the iRobot Home App. If you notice the robot picking up less debris from your floor, empty the bin, clean the filter, and clean the brushes.
Page 17
IMPORTANT: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care. For more information, visit global.irobot.com...
Page 18
Cleaning the Multi-Surface Brushes Cleaning the Full Bin Sensors Pinch the brush frame release tab, lift the tab, Remove the bin from the robot and clear any Remove and empty the bin. and remove any obstructions. debris from the vacuum path. Wipe the inner sensors with a clean, dry cloth.
Page 19
CAMERA WINDOW IMPORTANT: Do not spray cleaning solution or water onto the sensors or MACHINE WASHING sensor openings. Wash using the warm cycle, then air dry. Do not tumble dry. Do not wash with delicates. For more information, visit global.irobot.com...
Page 20
Replacing the Wick Cap Remove pad plate. Remove the wick cap by pulling on the side rubber tab. Replace with a new wick cap, pressing firmly into place to create a tight seal to prevent leaking. Reintall pad plate. Roomba Combo® j8 Enhanced robot + AutoEmpty dock Owner’s Guide...
Page 21
* Replacement frequency may vary. Parts should be replaced if visible wear appears. If you think you need a replacement part, please contact iRobot Customer Care for more information. IMPORTANT: Do not spray cleaning solution or water onto the sensors or sensor openings.
Page 22
Replacing the bag Removing Debris from Blower Cover Lift up on the canister lid to open. Install a new bag, sliding the plastic card into Inspect blower cover for any lint or debris build-up, the guide rails. This will seal the bag so dust and and wipe with a clean dry cloth to remove.
BATTERY SAFETY & SHIPPING the light ring indicator red. Press the clean button for details. Check the iRobot For best results, only use the iRobot Lithium Ion Battery that comes with your robot. Home App for further support. Lithium ion batteries and products that contain lithium...
Page 24
Your AutoEmpty dock will tell you if something is wrong via an LED indicator on the front of the canister and through the iRobot Home App. If the dock is not performing as expected, check the iRobot Home app for errors.
• ISED Radiation Exposure Statement: This product complies with the Canadian Changes or modifications not expressly approved by iRobot Corporation could Standard RSS-102 for mobile device RF exposure limits, set forth for an void the user’s authority to operate the equipment.
Page 27
Don't return to store. Let us help. iRobot USA Customer Care Hours Download the iRobot Home app or visit global.irobot.com for product support or to contact Monday to Friday, 9AM — 9PM Eastern Time your local support center. If you need further assitance in the US & Canada, call the US Saturday and Sunday 9AM —...
Need help?
Do you have a question about the Roomba Combo j8 Enhanced and is the answer not in the manual?
Questions and answers