Chapter 3
Installing the Router
Figure 3-23 Connecting to a Console Terminal
Connecting to the Auxiliary Port
To connect a modem to the auxiliary port on the router, perform the following procedure:
Step 1
Connect a modem to the auxiliary port using the black RJ-45-to-DB-25 adapter cable. (See
For information about auxiliary port pinouts, refer to the
Specifications
Note
On the Cisco routers, the auxiliary port is color-coded black.
Step 2
Make sure that your modem and the auxiliary port on the router are configured for the same transmission
speed (up to 115200 bps is supported) and hardware flow control with Data Carrier Detect (DCD) and
Data Terminal Ready (DTR) operations.
OL-2171-06
document available online and on the Documentation CD-ROM.
Connecting to a Console Terminal or Modem
Cisco Modular Access Router Cable
Cisco 2600 Series Routers Hardware Installation Guide
Figure
3-24.)
3-21