Known Hazards; Transporting The Radical L/S Kit - MotoCrane RADICAL L/S Kit Operation Manual

LONG MODE Payload All Up Weight [AUW] vs Counterweight [CW] Pre-load Chart
Payload AUW
Empty/No Payload
15lbs/7kg
20lbs/9kg
25lbs/11kg
30lbs/14kg
35lbs/16kg
NOTE: The values/weights listed above are "coarse" measurements that take into account the weight of
provided fairing and counterweight lock knobs. You are responsible for "fine-tuning" the counterweight to your
exact payload. To achieve "fine-tuned" balance, please refer to the BALANCE TEST feature of the COMMAND
Console. This is explained in detail within the COMMAND Console Operation Manual.
Maximum allowable Counterweight Pre-load without payload attached to the RADICAL
Isolator is 100lbs/45.5kg!

Known Hazards

The following list represents a list of known hazards that exist when
operating the RADICAL L/S Kit. This is not exhaustive, but represents some common
hazards to watch out for.
● RADICAL L/S Kit mounting. Make sure the RADICAL L/S Kit is secured and
does not shift around during operation. All fasteners must be tight and
secured, as per the setup instructions.
● RADICAL L/S Kit mounting. Tighten the RADICAL L/S Kit braces AFTER
securing the booms.
Counterweight Pre-load
Add 100.00lbs/45.5kg, mount payload, add remaining weight after
Add 100.00lbs/45.5kg, mount payload, add remaining weight after
143.75lbs/kg
Add 100.00lbs/45.5kg, mount payload, add remaining weight after
156.25 lbs/kg
Add 100.00lbs/45.5kg, mount payload, add remaining weight after
171.25 lbs/kg
Add 100.00lbs/45.5kg, mount payload, add remaining weight after
16
73.75lbs /kg
117.5 lbs/kg
130 lbs/kg