Advertisement
Quick Links
INSTRUCTION
STORAGE SHED INSTALLATION
If you have any questions about the storage shed, please feel free to contact us.
Customer Service Email: Service@alaulm.com
01SSR10X8-23-BROWN
IMPORTANT
PLEASE READ BEFORE YOU COMMENCE ASSEMBLY
Follow the guidelines in this user guide to ensure correct
assembly and care for this product.
Advertisement
Related Manuals for ALAULM 01SSR10X8-23-BROWN
Summary of Contents for ALAULM 01SSR10X8-23-BROWN
- Page 1 INSTRUCTION STORAGE SHED INSTALLATION If you have any questions about the storage shed, please feel free to contact us. Customer Service Email: Service@alaulm.com 01SSR10X8-23-BROWN IMPORTANT PLEASE READ BEFORE YOU COMMENCE ASSEMBLY Follow the guidelines in this user guide to ensure correct...
-
Page 2: Specifications
SPECIFICATIONS... -
Page 3: Table Of Contents
！ CATALOG Catalog Specifica�ons......................01 Note.........................03 Warning ........................03 Installa�on Notes.......................04 Exploded Views ......................05 Part List ........................06 Extra .........................08 How to Assemble Storage Shed ................09... -
Page 4: Note
！ NOTICE Note:Please prepare below tools before installation. The following tools are not included and needed for assembly: Pistol Drill Tape Measure Ladder Package included Tools Screw Driver Gloves x2 pair Screwdriver x1 Warning We recommend two adults to complete the installation. Two adults installed together will make the installation process easier and safer. -
Page 5: Installa�On Notes
！ NOTICE Installation Notes Please check the quantity of all parts before installation (Please refer to the Parts Lists) and the appearance of the products. Please make sure the product is correct before installation. If there is any problem, please contact us directly. Make sure the colored panels are facing outwards and all the holes match. -
Page 6: Exploded Views
EXPLODED VIEWS... -
Page 7: Part List
PART LIST Qty. Qty. PART. PART. 1403.6mm 1139.2mm 1403.6mm 1406.7mm 1093.3mm 1406.7mm 1136.1mm 1226mm 1093.3mm 100mm 405mm 1136.1mm 1350.1mm 405mm 1457.1mm 320mm 120mm 320mm 200mm 120mm 1510mm 1020mm 1410.2mm 1560mm 1410.2mm 1560mm 1139.2mm 1250.5mm... - Page 8 PART LIST Qty. Qty. PART. PART. 1072mm 1535mm 1393mm 1535mm 1560mm 1543mm 1560mm 532mm 1090mm 1236mm 1236mm 165mm 1560mm 1560mm 1560mm 1560mm...
-
Page 9: Extra
PART LIST Qty. Qty. PART. PART. Extra PART. Qty. PART. Qty. -
Page 10: Installation Steps
Installation steps Step 1 Step 1:Connect 1L and 1R with screws(S4). Qty. PART. NOTE:There are two screws on the inside that don't need to be installed. 1403.6mm 1403.6mm 120mm Step 2 Step 2:Attach the 15 to the bottom frame(1L and 1R) with PART. - Page 11 Installation steps Step 4 Step 4:Place the 4B in the grooves of the 2RF and 2RB, with the Qty. PART. holes aligned and screwed in place. NOTE:Screw the 4B to a part first. 1093.3mm 1136.1mm 200mm Step 5 Step 5:Place the 4B in the grooves of the 3L and 3R, with the Qty.
- Page 12 Installation steps Step 6 Step 6:Screw the bottom frame rod to the plastic connector(A, PART. Qty. B and C). NOTE:Note the orientation of the bottom frame tube, with the stepped portion facing outward.
- Page 13 Installation steps Step 7:Inserting the riser(5) into the plastic connector(A, B and Step 7 PART. Qty. NOTE:The riser is not stable and needs to be held by a person 1510mm or other object. Step 8:Snap the metal connector (12) onto the upper jamb bar Step 8 PART.
- Page 14 Installation steps Step 9 Step 9:Insert the plastic connector (I) into the middle connection Qty. PART. of 7F and 7B, then snap the connector (10) onto the two cross bars and secure with screws（S4）. 1139.2mm Note: Note the orientation of the crossbar, with the closer end of the two screw holes being the center position.
- Page 15 Installation steps Step 11 Step 11:Connect the upper frame bar and the riser bar with PART. Qty. plastic connectors(D,E and F) and secure with screws. Note: Note the direction of the mounting rods, the 6L and 6R cross rods are jamb rods, the side with more screw holes is the direction of the mounting stopper, towards the outside.
- Page 16 Installation steps Step 12 Step 12:Place the "L" shaped part 23 under the upper door PART. Qty. frame bars 6L and 6R and secure with screws from below. Note: Leave the two screw holes at the ends of part 23 1090mm unlocked.
- Page 17 Installation steps Step 14 Step 14:Connect the two pieces (W5) near the door to the upper PART. Qty. and lower bezel rods and lock with the screws (S4). Align the holes in the center of the spacer and finish installing 1560mm the screws(S6) and nuts(S7).
- Page 18 Installation steps Step 16 Step 16:Secure the mounted 17L, 17R and W6 to the upper and PART. Qty. lower bezel bars and lock with screws. Note: Place the spacer into the screws first, then the spacer and bezel bar holes are aligned for installation.Five holes on one side.
- Page 19 Installation steps Step 18 Step 18:Repeat the previous step, installing the right side spacer PART. Qty. with W3 near the front door frame face. Note: Place the spacer into the screws first, then the spacer and 1560mm bezel bar holes are aligned for installation. 1560mm Step 19 Step 19:Attach the 5 W5 pieces in turn to the top and bottom bezel bars on the...
- Page 20 Installation steps Step 20 Step 20:Install the plastic vent window(F6) inside the triangular support plate( PART. Qty. 21L,21R) and secure it with screws(S6) and nuts(S7), with the nuts installed on the inside. Then snap 11L and 11R into the triangular support plate(21L,21R), with the holes aligned, and sandwich 10F between the two triangular support 405mm plates(21L,21R), with the holes aligned with the holes near the long right-angled...
- Page 21 Installation steps Step 22 Step 22:Align the two top support bar(9) holes and secure with PART. Qty. screws(S6) and nuts(S7). Note: Two segments with similar screw holes are mounted on 1226mm top of each other, with the nut in the center section in the groove and the opposite on both sides.
- Page 22 Installation steps Step 24 Step 24:Connect the "L" shaped part(17) to the long pole at 90° PART. Qty. and fix it with screws(S6 and S7), then connect the two long poles with screws(S6 and S7). 1236mm Note: Nut mounted inside the groove of the long rod. 1236mm 165mm Step 25...
- Page 23 Installation steps Step 26 Step 26:Attach the four W15 cover plates from the end near the PART. Qty. door to the top bezel bar and support bar, with the holes lined up then mount with screws(S4). 1535mm Note: Pay attention to the direction of the cover plate(W15), the "L"...
- Page 24 Installation steps Step 28 Step 28:Place the plastic screw caps(F8) over the screws from PART. Qty. the inside of the tool room and press firmly. NOTE:This step is important to prevent problems with injuries. Step 29 Step 29:Screw the "L" shaped bezel strips(20) to the front and Qty.
- Page 25 Installation steps Step 30 Step 30:Attach the "L" shaped parts(19L,19R) to the left and PART. Qty. right edges of the cover, overlapping the four corners(F4) and the center(F10) joint with a plastic cover and securing it with 1072mm screws. 1393mm Step 31 Step 31:Place the plastic screw caps(F8) over the screws on PART.
- Page 26 Installation steps Step 32 Step 32:The screw holes on both sides of the top long cover plate(18) are first PART. Qty. attached with screws(S6) and nuts(S7), and then fixed to the top of the tool room through the center holes, securing it to the cover plate (W15) with plastic pieces 1072mm (F5) at both ends.
- Page 27 Installation steps Step 34 Step 34:Fix the door handle (F2) to the door panel (M1,M2) with PART. Qty. screws (S6) and nuts (F7). NOTE:Pay attention to the direction of the door handle. M1 or M2 Step 35 Step 35:Insert the lower part of the door panel (M1,M2) into the Qty.
- Page 28 Installation steps Step 36 Step 36:Secure the tool shed to the floor by attaching floor PART. Qty. spikes(S9) from the inside. If the shed is installed on grass,the[S9]can be used to increase the stability of the shed. www.alaulm.com...
Need help?
Do you have a question about the 01SSR10X8-23-BROWN and is the answer not in the manual?
Questions and answers
just recived box B is there a Box A
Missing L shape for doors
do you have instructions in inches and not millimeters