Advertisement
Quick Links
Advertisement
Summary of Contents for IWCS IriBoost
- Page 1 User manual iriBoost IriBoost V. 03/24FA...
-
Page 2: Table Of Contents
IWCS HOPE YOU WILL ENJOY THE BENEFITS OF TROUBLE FREE HIGH QUALITY INTERCOM. PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE FIRST USE. IF INSTALLED, OPERATED AND MAINTAINED ACCORDING TO THIS MANUAL THE IriBoost WILL BE A RELIABLE PARTNER FOR MANY YEARS TO COME. THOMAS B SVENNINGSEN CO-FOUNDER OF IWCS... -
Page 3: Introduction
Introduction 1.4 Safety warning 1.1 Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and The following general safety precautions must be observed during all phases of operation, the accompanying documentation is disclaimed by IWCS. service and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intended The information in this manual is provided for information purposes only, is subject to change use of the equipment. IWCS assumes no liability for the customer’s failure to comply with these without notice and may contain errors or inaccuracies. requirements. Manuals issued by IWCS are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. upon request at info@iwcs.eu • EMC / RF EXPOSURE IWCS is not responsible for the content or accuracy of any translations or reproductions, in the IriBoost is CE and UKCA certified as stated in the Declaration of whole or in part, of this manual from any other source. Conformity. 1.2 Copyright • FIRE In case of fire, harmful gases and fumes may occur. -
Page 4: Unboxing
Unboxing Installation 2.1 In The Box 3.1 Drill Template 1:1 1 x IriBoost 1 x Mounting Bracket iriBoost Scale 1:1. use for exact hole placement 1 x User Manual Hejrevang 13 +45 43 43 26 26 Hejrevang 13 +45 43 43 26 26 3450 Allerød... - Page 5 7 mm • Tape • 4,5 or 3,3 mm drill bits • Drill • Screw heads may not exceed 7 mm • Silicone based sealant 4 mm 3.3 Installation When mounting the IriBoost, it is essential to consider the material and the appropriate drill bit size. Please note the following guidelines: If you are using wood screws you will need: • 3x 4 mm screws. • Drill 3.3 mm holes. If you are using machine screws you will need: • 3x 4 mm screws. Backside of drill template • 3x locking bolts.
-
Page 6: Bracket Placement Page
150 millimeters to ensure proper cable clearance. between the bracket arms. Securely in place Gently use your hands to apply pressure and push the iriBoost into place within the bracket. Ensure a firm and secure fit by pressing it all the way until you feel a snap, indicating that it is properly seated in the sockets. It is important to note that this should be done manually without the use of any tools. -
Page 7: Operation
10-16 VDC / 10A (max) Part number IR-20-1220-01 Volume control 5.2 Cleaning Do not use chemicals or solvents to clean your IriBoost. Use only fresh water. Pressure, friction, sharp objects, etc. can damage the product and the warranty may be void. 5.3 Warranty iriBoost is covered by a two (2) year warranty. 5.4 Service / Upgrades IWCS Data Cable to iriSound AUX1 Any Service or additional Upgrades must be handled by IWCS Do not try to open or modify the IWCS product. 5.5 Maintenance If your IWCS IriBoost has been exposed to saltwater, chemicals or any other solvents/liquids, 12 VDC Supply immediately rinse with freshwater and wipe with a dry cloth. NOTE: The 12 VDC power source and the iriSound MUST have common ground. - Page 8 Hejrevang 13 +45 43 43 26 26 Hejrevang 13 +45 43 43 26 26 3450 Allerød info@iwcs.eu 3450 Allerød info@iwcs.eu Denmark www.iwcs.eu Denmark www.iwcs.eu V. 03/24FA V. 03/24FA...
-
Page 9: Hejrevang
IWCS Aps Hejrevang 13 3450 Allerød Denmark +45 4343 2626 info@iwcs.eu www.iwcs.eu...
Need help?
Do you have a question about the IriBoost and is the answer not in the manual?
Questions and answers