Selecting The Input Source - Denon AVR-3310CI Owner's Manual

GUI Menu Operation

Selecting the Input Source

There are three ways to select the input source, as described below.
q Selecting the input source using the Source Select menu (GUI menu)
[INPUT SOURCE SELECT]
w Selecting the input source using the
<SOURCE SELECT>
e Selecting the input source using the
q Using the Input Setup Menu
The input source can also be selected using the source selection menu.
1
[DEVICE SELECT 1]
Set to "MAIN/TV" and
[DEVICE SELECT 2]
to "MAIN".
2
Press [SOURCE SELECT] .
Display the "Source Select" menu.
q
w
e
q Input Source : The name of the highlighted input source is displayed.
w Recently used sources : The recently used input sources (up to 5) are displayed.
e Icons for the input sources in the different categories are displayed.
Video :
(SAT/CBL), (TV),
Player :
(HDP), (DVD), (CD),
Tuner :
(HD Radio), (SIRIUS)
Network : (Favorites), (Internet Radio),
(Rhapsody)
3
Use to select the input source icon, then press
uio p
The input source is set and the source selection menu is turned off.

(Main remote control unit)
(Main unit)
The currently selected input source
is highlighted.
" " is displayed when using
a control dock for iPod.
(VCR), (DVR), (V.AUX)
(PHONO)
(Media Server), (USB), (Napster),
ENTER
.
• Use the device selection buttons on the main remote control unit to set the device to be operated
beforehand.
• When using with an iPod connected directly to the AVR-3310CI's USB pot, select "USB" for the input
source.
• Input sources that are not going to be used can be set ahead of time. Make this setting at "Source
Delete" (vpage 42).
• To turn off the source selection menu without selecting an input source, press
again.
w Operating on the Main Remote Control Unit
Front
1
[DEVICE SELECT 1]
Set
SELECT 2]
to "MAIN".
Front
2
Press [INPUT SOURCE SELECT]
The desired input source can be
selected directly.
e Operating on the Main Unit
<SOURCE SELECT>
Turn
b If "ZONE2/3/ Rec Select", "Video Select" or "Tuning Preset"
mode is selected for the input source, press
<SOURCE SELECT>
before turning the
[DEVICE
to "MAIN/TV" and
.
Front
.
<SOURCE>
.
[SOURCE SELECT]
Front
Rear