Closing The Server Module - Dell 1955 Hardware Owner's Manual

Figure 3-14. Inside a Server Module
5
1 optional daughter card
4 hard drive 0

Closing the Server Module

CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
1 Ensure that no tools or parts are left inside the system.
2 Align the cover with the cover alignment pins on the sides of the chassis, and slide the cover forward.
See Figure 3-15.
3 Install the server module. See "Installing a Server Module."
76
Installing System Options
1
6
2 memory modules
5 hard drive 1
3
4
3
6
2
heat sink and processor 2
heat sink and processor 1