Dell W1900 Owner's Manual page 14

Using the ANT/Cable (Coaxial) Connector
1
Turn off the TV display and unplug the power cord.
2
Connect the coaxial cable to the ANT/Cable connector of the TV display.
3
Plug in the power cord for the TV display and turn on the TV display.
4
Enter the on-screen-display (OSD) and select TV. For additional information about the Input
Select menu, see page 24.
Using the Composite Connector
1
Turn off the TV display and unplug the power cord.
2
Connect your device including the audio cables.
3
Plug in the power cords for the TV display and devices and turn them on.
4
Enter the OSD and select the AV1 (Composite). For additional information about the Input
Select menu, see page 24.
14
Setting Up Your TV Display