Download
Share
Print this page
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Firewall
  5. DFL-300 - Security Appliance
  6. Quick install manual

D-Link DFL-300 Quick Install Manual

D-link dfl-300 : install guide
Hide thumbs Also See for DFL-300:

Advertisement

Quick Links

Download this manual See also: User Manual
Review Package Contents
Make sure that the package contains the following items. If
any items are missing, contact the reseller.
§ DFL-300 Firewall
§ Manual

Connecting the DFL-300

§ Quick Install Guide
§ AC Power Adapter

Advertisement

loading

Related Manuals for D-Link DFL-300

Summary of Contents for D-Link DFL-300

  • Page 1: Connecting The Dfl

    Review Package Contents Make sure that the package contains the following items. If any items are missing, contact the reseller. § DFL-300 Firewall § Quick Install Guide § Manual § AC Power Adapter Connecting the DFL-300...

  • Page 2: Setting Up The Computer

    Connect one end of the Ethernet cable to the Internal/LAN port of the DFL-300 and the other end of the cable into a hub or switch on your network. If the cable connection is good, a green LED on the front of the DFL-300 should come on for Internal Link.
  • Page 3 At this screen, select the IP address tab. Select Obtain an IP Address Automatically. Click OK If you are prompted to restart your computer, please do so. When the computer restarts, it will automatically receive an IP address from the DFL-300 firewall.
  • Page 4 Configuring the DFL-300 Note: The DFL-300 requires Internet Explorer 4.0 or higher, or Netscape Communicator 4.0 or higher. Please open your Web Browser and enter this URL: http://192.168.1.1 This will launch the DFL-300’s integrated web-based management system. This Enter Network Password pop-up screen will appear.
  • Page 5 Configuring the DFL-300 continued… If your ISP requires you to enter a username/password for a PPPoE connection, choose PPPoE (ADSL User) Fill in your PPPoE username and password provided by your ISP. Click Ok at the bottom when done.
  • Page 6 Configuring the DFL-300 continued… If your ISP assigns you a dynamic IP address, choose Dynamic IP Address (Cable Modem User) Fill in the Hostname if provided by your ISP. Click Ok at the bottom when done.
  • Page 7 Configuring the DFL-300 continued… If your ISP assigns you a static IP address, choose Static IP Address Fill in the static IP information provided by your ISP. Click Ok at the bottom when done. Now set up the Outgoing Policy. Click on Policy on the left...
  • Page 8 There should now be an Outgoing Policy created. This policy will allow all computers in the Internal network to access the Internet. Note: You do not need to manually restart the DFL-300 Firewall. The changes will take place immediately once you click Ok. Once you are finished with...
  • Page 9 Internet. The VPN policy will use IPSec to securely send/receive encrypted data over the Internet. This example will consist of two DFL-300 Office Firewalls with a simple setup to enable VPN. The two remote locations in this example will be call Site A and Site B.
  • Page 10 We will begin by configuring the DFL-300 at Site A . Start by going into the web configuration. Once in, go to the VPN menu. You should now be under VPN>Autokey IKE. Click New Entry Please fill in the appropriate information for Site A.
  • Page 11 There should now be a VPN Policy created for Site A. Site A is now complete, we will now configure Site B with the other DFL-300. Follow the same steps previously with Site A to create a VPN policy. Please change the appropriate IP information.

  • Page 12: Technical Support

    Technical Support D-Link provides free technical support for customers within the United States during the warranty period. U.S. customers can contact D-Link Technical Support through our web site, by e-mail or by phone. D-Link Technical Support over Telephone: (949) 790-5290 6 a.m.