Wireless--Bridge - D-Link DSL-2640B User Manual

Section 6 - Advanced Setup
This section allows you to configure WDS (Wireless distribution System). WDS allows your wireless network to be
expanded using multiple access points without the need for wired connections between the APs.
AP Mode:
Select Access Point to allow the router to
connect wirelessly to other WDS enabled
routers and allow wireless clients to connect.
Wireless Bridge will only allow the router to
connect to other WDS enabled routers.
Bridge
Select Disabled to disable wireless bridge
Restrict:
restriction. This will allow any wireless bridge
to connect to the router. Select Enabled or
Enabled(Scan) to restrict the router from
connecting to wireless bridges that are not
authorized.
Remote
If Bridge Restrict is set to Enabled or
Bridges MAC
Enabled(scan) only those bridges whose
Address:
MAC addresses appear in these fields will
be granted access.
Click Refresh to update the Remote Bridges MAC
Address fields. Click Save/Apply to save the wireless
bridge options.
D-Link DSL-640B ADSL+ 4-Port Router User Manual

Wireless--Bridge

61