Download Print this page
Alcatel OS-6148 Specifications

Alcatel OS-6148 Specifications

Omnistack 6100 series

Advertisement

Quick Links

OmniStack 6100 Series
Stackable Workgroup Switches
for the Enterprise

Advertisement

loading
Need help?

Need help?

Do you have a question about the OS-6148 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alcatel OS-6148

  • Page 1 OmniStack 6100 Series Stackable Workgroup Switches for the Enterprise...
  • Page 2 flexibility in supporting today’s enterprise applications. The OmniStack 6100 series is a part of the Alcatel OmniStack family and consists of two stackable switching products: the OmniStack 6124 (24-port) and the 6148 (48-port). These switches provide 10/100 Ethernet switching for workgroups and are ideal for medium and large enterprise networks.
  • Page 3 10/100 ports can also be aggregated to create a high-speed link to a server or network backbone. Up to four full duplex 10/100 ports can be aggregated gradually to create an 800 Mbps pipe.
  • Page 4 OmniStack 6124/6148 Base Switching Unit Management module slot Accommodates the OS-6124-MGT-KIT or OS-6148- MGT-KIT module. At least one management module is required per standalone base-unit or per stack. Optional module slot #2 Optional module slot #1 Supports the following modules:...
  • Page 5 MIB, RMON MIB, and private MIB OS-6148: Five trunks with up to four ports per trunk per unit, or 12 trunks with up to four ports per trunk per 6148 RMON: Groups 1, 2, 3, 9 (statistics, history, alarm, and event)
  • Page 6: Standards Compliance

    IEEE 802.1p Priority support IEEE 802.1p Priority support IEEE 802.1D (Bridging), 1993 IEEE 802.1D (Bridging), 1993 IEEE 802.1Q (Virtual LAN) 1998 IEEE 802.1Q (Virtual LAN) 1998 IEEE 802.3ac frame extension for VLAN tagging IEEE 802.1x > 6 A L C AT E L...
  • Page 7: Ordering Information

    OS-6GSM-GBIC-1E OmniStack 6124 and 6148 GBIC module, 1 port, GBIC connector. GBIC transceiver must be ordered separately. When this module is used with OS-6124 or OS-6148 and running SW V 3.2 or higher, the DSCP to CoS feature is enabled.
  • Page 8 Product specifications contained in this document are subject to change without notice. Contact your local Alcatel representative for the most current information. Copyright © 2002 Alcatel Internetworking, Inc. All rights reserved. This document may not be reproduced in whole or in part without the expressed written permission of Alcatel Internetworking, Inc. Alcatel ®...

This manual is also suitable for:

Omnistack 6124Omnistack 6148