Canon VB-C500D Operation Manual page 25

(4) [Administration Function Name]
Set the camera name used for administration. The set name can be referenced by the SNMP
Manager.
If this field is left blank, "VB-C500VD" is used by default when the connected camera is
VB-C500VD, and "VB-C500D" when the connected camera is VB-C500D.
(5) [Installation Location]
Set information regarding the installation location of this camera. The set name can be
referenced by the SNMP Manager.
Tip
The information set in the camera is read-only from the SNMP Manager.
Use the SNMP Manager SNMP MIB2 (supporting RFC1213).
The camera's SNMP does not support IPv6.
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
1
1
1-11