Ospfv3; Configuring Ospfv3 Basic Parameters - Ruijie Reyee RG-NBS Series Configuration Manual

Configuration Guide
11.6

OSPFv3

Open Shortest Path First (OSPF) can be applied to large-scale networks. IPv4 uses OSPFv2, and IPv6 uses
OSPFv3.
11.6.1

Configuring OSPFv3 Basic Parameters

Choose Local Device > Routing > OSPFv3, click Start Setup, and then configure an instance and an interface
respectively.
1. Configure an instance.
OSPF
OSPF is a typical link-state routing protocol. To satisfy users' increasing requirements for network reliability and
heterogeneity on a large network, OSPF solves the problems such as slow convergence, unscientific metric
values, and poor scalability.
Highlights
Achieves fast convergence.
Minimizes routing overhead.
Reduces routing update traffic through area partition.
Applies to various networks with up to thousands of switches.
164
Configuring Route