cenmate 802RU User Manual

2 Bay RAID HDD ENCLOSURE USB 3.0 to SATA
PRODUCT INSTRUCTION
1.CONTENT
/
3.CONNECTING HDD
802RU
Connect the USB cable
to the computer
Select the RAID mode when
power is off. Power on the
unit while holding down the
reset button for 5 seconds
4.Partition and Format
1. Right click on "My Computer"
icon and select "Manage".When
this window appears, select
"Disk Management".
Pull out the hard drive
from the unit
Connect the USB 3.0
connector to the unit
Please follow below information on how to
partition and format the drives before use
Data will be lost when you reset the unit
2. Right click on the disk on "New
Volume" and select "Initialize Disk".
Model : 802RU
2.OS Support
Windows 2000/ Me/ XP /
Vista/ 7/ 8/ 8.1/10 and
above, Mac OS 9.1/10
and Linux
Install the hard drives into the
trays and put it back to the unit
Connect the power connector
from the power adapter, and
plug the power adapter to the
power source
3. Select the new disk to start with
the configuration.